Loading ...
Loading ...
Loading ...
Delta Heat Service (562) 263-3600 | 2
Read this instruction completely before starting installation. Planning the complete installation
before starting work is highly recommended. This includes all aspects of the installation including
hood location, ducting, electrical requirements, and adequacy of mounting surfaces.
1. Remove all packaging materials, labels and protective plastic lm. DO NOT LEAVE UNIT IN THE
SUN WITH PROTECTIVE PLASTIC FILM ON FOR AN EXTENDED PERIOD OF TIME AS IT
WILL BECOME DIFFICULT TO REMOVE.
2. Check to ensure all Vent Hood accessories listed below are included.
3. Assemble parts as per assembly instructions.
4. Fill out Warranty Registration Card and mail it to the indicated address, or register online. See
page 17.
Vent Hood Accessories DHVH36 DHVH48 DHVH60
BAFFLE FILTER 3 4 5
CAUTION:
• To reduce the risk of re and electric shock, install this vent hood only with Integral Blower
TEVI-120I-C.
• The hood is of sucient weight that two installers are recommended to prevent injury or damage
to the hood in handling.
• Hood is recommended for use over domestic gas or electric appliances. Not recommended for
use over solid fuel red appliances.
Getting Started:
The vent hood is operated by a 3-speed rotary control switch located in the front left of the
hood. Medium to low speed will handle most exhaust requirements. Use the high-speed position for
heavy cooktop use conditions. Turn the vent hood on just before cooking to prevent the escape of
discharges from the cooking surface.
The light rotary switch is located to the right of the ventilation control.
OPERATING INSTRUCTIONS:
CLEANING AND MAINTENANCE:
CAUTION: Shut o power to unit at service entrance if you are cleaning the blower.
Use a damp cloth to wipe the outer surface of the blower. Do no use a dripping wet cloth to wipe
blower. Never put your hand int the blower housing.
To clean the hood surface use only mild soap or detergent solutions. Wipe to dry surfaces using a soft
cloth. If a stainless surface is being cleaned, always wipe in the direction of the brush surface.
Cleaning aids such as “Stainless Steel Magic” are available. Never us abrasive cleaners, pads or
cloth.
Loading ...
Loading ...
Loading ...