Loading ...
Loading ...
Loading ...
11
TRAEGERGRILLS.COM
SEASONING YOUR GRILL
TO BE USED ON INITIAL FIRING ONLY. In order to ensure proper operation of the grill, you must first prime the
auger by allowing the auger tube to be “charged” with pellets.
1 2
Fill the hopper with TRAEGER® BRAND HARDWOOD
PELLETS.
PLUG APPEARANCE MAY VARY BY REGION.
With the Main Power switch in the OFF (O) position, plug
the power cord into an appropriate grounded/earthed
electrical outlet.
AUGER
>Prime Auger
>Clear Auger Jam
>Back
3
Press MENU to display the main menu. Turn the dial to
select AUGER, then select Prime Auger.
The auger tube should take approximately 2 minutes
to fill with pellets and begin dispensing into the firepot.
Once pellets begin to fall into the firepot, select Back
to turn o the auger. You only need a few pellets in the
firepot to season your grill.
4
Press dial
to set temp
350
°F
The home screen will display “Press dial to set temp.”
Turn the Selection dial clockwise to 350°F (177°C). Press
IGNITE, close grill door, and run grill for 20 minutes once
it has reached the set temperature.
WARNING! Use ONLY TRAEGER® BRAND
HARDWOOD PELLETS, which are specifically made to
work in our grills. Never use heating fuel pellets in
the grill.
NOTE: Whenever you’re instructed to
select or confirm a menu option, turn
the Selection dial to the desired option and press the
center of the dial to lock in your selection.
Press Dial To Set Temp
350
°F
Press Dial To Set Temp
4731 Ironwood_OM_ENv28.indd 11 10/15/18 3:28 PM
Loading ...
Loading ...
Loading ...