Loading ...
Loading ...
Loading ...
Suggested 10 place setting loading patterns
Knife holder
Use the knife holder on the left side of the bottom rack to hold
knives that are too large for the silverware basket. Place knives in
the holder as shown.
TURBOZONETM 10 place setting top rack load
To remove the knife holder
1. Slide up to release the hooks over the rack wire.
2. Lift knife holder out of rack.
To install the knife holder
1. Align the knife holder with the bottom rack as shown in the
illustration below.
2. Place the bottom slotted guide over the vertical wire in the
side of the rack.
3. Place the hooks, located on the back of the knife holder, over
the center rack wire and gently push down to lock into place.
TURBOZONETM 10 place setting bottom rack load
Fold-down tines
You can fold down one row of tines at the back of the bottom
rack.
1.
2.
3.
Grasp the tip of the tine that is in the tine holder.
Gently pull the tine out of the tine holder.
Lay the row of tines down in the rack to make room for larger
dishes, bowls, pots, pans or roasters.
B
A. Top alignment
B. Bottom slotted guide
C. Knife holder hooks
11
Loading ...
Loading ...
Loading ...