Loading ...
Loading ...
Loading ...
QUICK START GUIDE
u-line.com
33
NUGGET ICE MACHINE CLEANING CYCLE
This ice machine has an automatic clean alert function.
The control will indicate
CL in the display,reminding you
to clean your unit. When
CL is displayed, ice production
will continue. Depending on water conditions, more
frequent cleaning may be necessary: see chart below.
Cleaning removes lime scale, other mineral deposits, and
sanitizes the machine. Poor ice quality and reduced ice
output are signs that cleaning is necessary.
Do not use cleaners not specically intended for
TDS (Total Dissolved Solids)
Level mg/L (ppm)
Cleaning Interval
5 - 150 6 months
150 - 250 4 months
250 - 400 3 months (or sooner)
Hardness Level mg/L (ppm) Cleaning Interval
0 - 66 6 months
67 - 133 4 months
134 - 200 3 months (or sooner)
Under normal conditions cleaning should be done
when the display shows
CL. You may initiate
a cleaning cycle at any time by pressing and
holding the clean button for 10 seconds.
0 1 will
appear in the display indicating the start of the
cleaning process.
You may override
CL in the display without cleaning by
pressing and holding the up, down, & light button for 10
seconds.
ICE will scroll in the display and the cleaning
reminder (
CL
) will be reset for another approximate six
month cycle. Failure to clean may reduce the quality
and quantity of ice produced. Once the clean cycle
begins, it can be canceled by pressing three times.
Press once more to start making ice. The clean cycle
will automatically cancel if user fails to activate control at
steps 2, 3b, and 5b within 2 hours.
other cleaner may damage the nish of the
Select models include a water lter. The lter
the machine. The lter is designed to lter out
well as reduce chlorine and other o tastes
lter (Part No. ULANUGGETFILTER) when you
clean your machine. The lter is available at
The unit will resume operation approximately 15 minutes
after the automated cleaning process is completed. The
uneven sized cubes or water to spill into the ice storage bin.
This is a normal situation that will correct itself within the
NOTICE
Discard all ice produced in the rst harvest.
Should power to the unit be interrupted during
the self-clean cycle, it will be necessary to repeat
the complete cleaning cycle after the power is
restored.
REFRESH KIT
Due to variations in water quality or inadequate
maintenance, your unit may become excessively coated in
kit which replaces man interior components and will return
your unit to like-new condition. Refresh kits may be ordered
from your local distributor and installed by your local
service company. For information on your local distributor
or service company please visit www.u-line.com.
(approximately 3 minutes), pour 1 packet of CLR
cleaner into the water trough. The cleaning process will
last approximately 45 minutes.
Dilute 1 tablespoon bleach in 1 gallon of warm water.
Apply this solution to the entire inside of the storage
area. Then rinse thoroughly with water.
9.
10.
Loading ...
Loading ...
Loading ...