Loading ...
Loading ...
Loading ...
10
Control Arm
The E720 Pedal: This patented
design allows for usage in both the
recumbent position and for sitting/
standing upper body workouts.
L-Pin: Loosen when rotat-
ing the control arm and
tighten (snug only) once the
desired position has been
reached.
T-Pin: The T-pin locks the
control arm in any one of 72
different positions through-
out its 360 degree range of
motion. Pull up the T-pin to
allow the control arm to ro-
tate while supporting the
control arm with the other
hand.
Crank Arm bolts: Loosen
all 8 bolts slightly before
adjusting/tightening chain.
Chain Tensioning Bolts: Allows for tightening the chain or adjustment from
side to side. Make sure when tightening only to adjust the same amount for both
bolts, otherwise the sprocket will be misaligned.
Note: Tightening the right bolt only will pull the right side of the crank as-
sembly toward you, tightening the left will pull the left side toward you. Use this fea-
ture to realign the rear with the front sprocket if needed or when changing to a new
chain.
Inspection plate: Open to
check chain tension.
Warning: Do not check
chain tension by hand!
Loading ...
Loading ...
Loading ...