Frigidaire PLES389ECB electric range

User Manual - Page 11

For PLES389ECB.

PDF File Manual, 28 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Models with Ceramic Glass Cooktop
(continued)
Operating the Dua_ Surface Radiant E_ement
(ModeJs with Ceramic G_ass Cooktop On_y}
Model A is equipped with DuaUradiant surface eUementsataH
positions (See Figure 8). ModeUs B & C are equipped with a
duaU radiant surface eUement Uocated at the right front (See
Figures 9 & 10) position. SymboUs on the controU paneU are
used to indicate which coil of the duaUradiant eUementwHUheat.
The 0 symboU indicates that onUy the inner coil will heat
(Figu res 1,3,4 and 5). The (_ symbol indicates that both inner
and outer coils will heat (Figures 6, 8, 9 and 10). You may
switch from either coil setting at any time during cooking.
To Operate the DuaJ Surface E_ement:
1, Place correctly sized cookware on the dual surface
element,
2. Push in and turn the control knob counterclockwise (See
Figu re2) for smaller cookware or clockwise (See Figure 7)
fodarger cookware.
3,
Turn the knob to adjust the setting if needed. Start most
cooking operations on a higher setting and then turn to a
lower setting to finish cooking. Each surface element
provides a constant amount of heat at each setting. A
glowing red surface heating area extending beyond the
bottom edge of the cookware indicates the cookware is
too small for the surface heating area.
4,
When cooking has completed, turn the surface control
knob to OFF before removing the cookware. Note: The
Surface Indicator light will come on when the control knob
will be turn on and will continue to glow until the glass
cooktop has cooled down to a moderate level. The light
may remain on even though the controls are turned OFF.
Note: See page 9, Figure 1 for recommended control settings.
cooled after they have been turned off. A hot surface indicator
light will come on and will continue to glow until the glass
cooktop has cooled down to a moderate level. The glass
surface may still be hot and burns may occur if the glass
surface is touched before the indicator light has turned off.
0
Small
Element
Figure 1
Small
Pe_i_ OFF
o hi hi @
2
o o
1o 1o @ ®
Figure 2
o o
o o
Figure 3 - Model A
) o o
o o
Figure 4 -Model B
oo@
o o
Figure 5 -Model C
@
Large
Element
Figure 6
Small
r_e_i_ OFF
o hi hi @
o o
Figure 8 - Model A
o o
o o
Figure 9 - Model B
o o
Figure 10 - Model C
11
Loading ...
Loading ...
Loading ...