Loading ...
Loading ...
Loading ...
17
Instant Channel memory change
To change the pre programmed INS CH
1. Select the required channel.
2. Press and hold the instant button until “MW INST” appears on the LCD.
3. Press the INS CH button that you want to change and the new
channel information will be saved.
Instant Channel scanning
1. Press SCAN button to start scanning.
2. Press and hold 2 seconds scan button again. Then scanning will
be changed to 3 INS CH scanning mode.
3. When you want to stop scanning, you can press the SCAN button
or push the PTT button.
Duplex
Duplex can be turned off and on for each channel in Menu mode. The
Display shows DPX only available on channels (1-8) and (41-48).
General
Your radio has a Repeater Access function to allow use of local
repeater stations (if available in your area). Repeaters are a shared
radio system installed by interested parties (clubs,local businesses
etc.) that pick transmissions on specic channels and re-transmit (or
repeat) the received signal to another channel.
Channel
2
Channel
32
C
h
a
n
n
e
l
2
Channel 32
Repeater Station
The Repeater Access function can be set (from channel 1 to 8 and
41 - 48) used by local repeater stations. When activated, your radio
will receive the Repeater on its specic channel (all repeater output are
Operations
Loading ...
Loading ...
Loading ...