Loading ...
Loading ...
Loading ...
8
OPERATION
IMPORTANT: The most effective method of
removing vapors produced during cooking
is to:
K Switch the ventilator ON prior to
cooking or as soon as you begin
cooking.
K Switch the ventilator OFF
a few minutes after you have finished
cooking.
Acoustic signal:
K When a button is pressed, this is verified
by an acoustic signal.
Switching off the acoustic signal:
K Simultaneously press buttons 0 and +
until a signal is emitted after approx.
3 seconds.
Switching on the acoustic signal:
K Repeat the process.
Switching the fan ON
K Press the + button or pull out the filter
drawer.
Setting the required fan speed:
K Press the + button.
The fan speed is increased by one step.
K Press the – button.
The fan speed is reduced by one step.
Switching the fan OFF:
K Press the 0 button.
The displayed
{ goes out shortly
afterwards.
Or:
K Keep pressing the – button until the fan
switches off.
The displayed
{ goes out shortly
afterwards.
Intensive setting:
Maximum power is obtained at the
intensive setting.
It is only required for short intervals.
K Keep pressing the + button until a
ç
appears in the display.
K If the intensive setting is not cancelled by
hand, the
fan will automatically switch back to step
} after 10 minutes.
Delayed Shut Off:
K Press the ! button or push in the filter
drawer.
The fan runs for 10 minutes at setting 1.
At the same time a dot flashes in the
display.
Then the fan switches off automatically.
Lighting:
K Briefly press the a button to switch the
light on and off.
K The light can be switched on at any
time, even though the fan is switched off.
K Adjusting the brightness:
Hold down the
a button until the
desired brightness is obtained.
Light Reduce fan
speed
Fan ON and
increase speed
Display for fan setting
Delayed Shut
Off
Fan OFF
Loading ...
Loading ...
Loading ...