Loading ...
Loading ...
Loading ...
CHUCK REMOVAL
See Figure 9,
The chuck must be removed in order to use some
accessories. To remove:
• Unplug your drill,
,_k WARNING: Failure to unplug your drill could
result in accidental starting causing serious
injury.
• Rotate torque adjusting ring to the maximum
torque setting.
• Insert a 8 mm (5/16 in,) or larger hex key intothe
chuck of your drill and tighten chuck jaws
securely.
• Tap the hex key sharply with a mallet in a
counterclockwise direction, See Figure 9.
• This will loosen the chuck on the spindle.
• It can now be unscrewed by hand. See Figure 9,
• Open chuck jaws and remove hex key.
LLET
TORQUE
ADJUSTING
RING
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on the spindle and
develop a wobble,
To tighten, follow these steps:
• Unplug your drill,
,_IL WARNING: Failure to unplug your drill could
result in accidental starting causing serious
injury.
• Open the chuck jaws.
• Insert hex key into chuck and tighten chuck jaws
securely. Tap hex key sharply with a mallet in a
clockwise direction.
• This will tighten the chuck on the spindle.
• Open the chuck jaws and remove the hex key.
CHUCK
JAWS
KEYLESS
CHUCK
Fig. 9
11
Loading ...
Loading ...
Loading ...