BDH2020FLAAPB User Manual

Loading ...

•Rotate the locking ring (3) counterclockwise to

release the clips.

•Pullthehoseawayfromthehandle.

•Fit the accessory directly to the hose cuff (20).

To refit the handle:

•Removetheaccessoryfromthehose.

•Pushthehoseintothehandle(2).Rotatelocking

ring (3) clockwise until it clicks into place.

ASSEMBLING FLOOR HEAD (FIGURE E)

(BDH2020FLFH ONLY)

This vacuum is equipped with a floor head for wider

floor cleaning.

•Pressandholdtheaccessoryclip(11).

•Slidethefloorheadadapter(17)ontothehandle

(2).

•Connectthetwofloorheadextensions(18),extension

connector (19), and the floor head (20) to the end for the

floor head adaptor.

NOTE: The floor head attaches using friction fitting, so a

click will not be heard when assembled. Ensure that all

parts of the floor head assembly are securely connected.

CARPET / FLOORING SELECTOR SWITCH (FIGURE F)

The floor head’s agitator brush can be used for light carpet

cleaning and removing tough messes on hard floors. It can

be activated by depressing the selector switch (21) located

on the top of the floor head accessory.

•Toengagetheagitatorbrush,depressthesideofthe

selector switch marked

•Todisengagethebrush,depressthesideoftheselector

switch marked .

OPERATION

Before first use, the batteries must be charged for at

least 4 hours.

•Connecttheappliancetothechargerforaminimumof

4 hours.

•Chargethebatteriesasdescribedbelow.

CHARGING THE BATTERY (FIGURE G)

WARNING:

Charge only at ambient

temperatures between 50°F (10°C)

and 104°F (40°C). The charger supplied with this product is

intended to be plugged in such that it is correctly oriented in

floor mount position.

To charge the appliance:

•Makesuretheapplianceisswitchedoff.Thebatterywillnot

be charged with the on/off power switch (1) in the on position.

•Plug the charging base (15) into a standard 120 Volt 60

Hz electrical outlet.

•Lowertheapplianceontothechargingbase.The

charging indicator LED will illuminate.

•Whenchargingiscomplete,theLEDwillturnoff.

Whilecharging,thechargermaybecomewarm.Thisis

normal and does not indicate a problem.

Leaving the appliance connected to the charger indefinitely

will not damage the appliance’s batteries or shorten

its run time. The charger automatically reduces power

consumption when charging is complete.

Downloaded from www.ManualsFile.com manuals search engine

Loading ...

User Manual - Page 5