Loading ...
Loading ...
Loading ...
To make it possible to fasten the refrigerator panel at the
bottom the soft-stop cylinder must be dismantled.
5. Grasp the soft-stop cylinder and pull down (Figure
26).
The soft-stop cylinder retracts in the
detached state.
Figure 26
Figure 27
6. Transfer the lower edge of the attachment bracket
onto the panel using a pencil. (Figure 27). Remove
the panel from the refrigerator door.
Figure 28
7. Dismantle the lower attachment bracket from the
refrigerator door. Align the bracket to the lines on the
refrigerator door panel. (Figure 28).
Fasten the bracket with any hole wherever possible
using a minimum of 6 screws 4 x 16 mm.
8. Open the refrigerator door and hang the panel on
the adjusting bolts (Figure 29).
9. Screw on the hex nuts to the adjusting bolts and fin-
ger tighten temporarily (Figure 29).
Figure 29
15
InStallatIon
Loading ...
Loading ...
Loading ...