Loading ...
Loading ...
Loading ...
6
Using the Thermometer
High & Low Records
The thermometer records high and low temperature records for each sensor.
These readings reect the highest and lowest temperatures recorded since the
batteries were inserted or since the CLR button was last pressed.
To reset the High/Low records, press and release the “CLR” button once. This
clears the records from both sensors.
Programmable Alarms
Programmable alarms notify you audibly and visually when temperatures
exceed your preset minimum / maximum temperature range. An alert is
triggered when a temperature is out of range for longer than 15 minutes. This
prevents false alarms due to the fridge/freezer door being held open while
new items are being loaded/unloaded.
The default temperature alarm settings for Sensor #1 (refrigerator thermome-
ter) are minimum 33ºF / maximum 40ºF. The default temperature alarm settings
for Sensor #2 (freezer thermometer) are minimum -22ºF / maximum 0ºF.
To customize temperature alarms:
1. Press and HOLD the “ ” button until the Current Temperature disappears
and the maximum temperature alarm setting is shown in its place.
2. Press the “ + “ or “ – “ buttons to increase or decrease the maximum
temperature alarm setting.
3. Press the “ ” button to conrm the maximum temperature alarm setting.
The unit will beep and the minimum temperature alarm setting wil be shown.
4. Press the “ + “ or “ – “ buttons to increase or decrease the minimum
temperature alarm setting.
5. Press the “ ” button to conrm the minimum temperature alarm setting.
6. Press the “ ” button to turn ON/OFF the alarm. The “ “ icon on the
the display indicates that the alarm is ON.
For Alarm #2, repeat steps 1 through 5 using the “ ” button.
NOTE: When thermometer is in normal operating mode (not in alarm setup
mode), the High/Low readings display the highest/lowest temperature
recordings.
OPERATION
Loading ...
Loading ...
Loading ...