Loading ...
Loading ...
Loading ...
2. Press the keypads for the desired cycle, selection and op-
tion settings.
3. Press the Favorite keypad to save the settings. The next Fa-
vorite cycle, F2, will be displayed. It can be programmed
now.
4. Press the Start/Pause or Delay Start keypad to save the
settings and start the cycle.
5. Press the Power/Cancel keypad to discard the current set-
tings and exit Favorite mode.
DRY2777N_SVG
Selections
The following selections can be used to modify the currently
chosen cycle. The default selections will be lit after choosing a
cycle.
Temp
Press the Temp keypad to change a Manual cycle’s tempera-
ture.
Choose from No Heat, Low, Medium or High.
Dryness
Press the Dryness keypad to change the dryness level in an
Auto-Sensing cycle. Choose from Damp, Less Dry, Near Dry or
Dry.
Damp Leaves load slightly damp for
easier ironing.
Less Dry Use for lightweight items
such as sheets and shirts.
Near Dry Use for normal loads.
Dry Use for heavy items such as
blue jeans and blankets.
Over-drying can cause wrinkling, shrinking, excessive lint con-
ditions, and will use more energy than necessary. To increase
energy savings and to make sure loads are dried without over-
drying, set your Auto-Sensing loads on Near Dry or Less Dry. If
items are damp or over-dry at the end of a cycle, increase or
decrease the Dryness setting the next time these loads are
dried. Remember the settings that work best to get ideal dry-
ing results.
Moisture Level
The Moisture Level status lights will be lit during an Auto-Sens-
ing cycle. The Sensing light will be lit at the beginning of the
cycle.
The Wet, Damp and Dry lights will be lit based on readings
from the moisture sensing system.
Options
The following options can be used to modify the currently
chosen cycle, signal volume and control lock.
Anti-Wrinkle
This option prevents wrinkling by tumbling the clothes load af-
ter the end of the cycle every two minutes for up to 60 mi-
nutes. The display will show the time remaining. The option will
end if the door is opened.
EcoDry
The EcoDry option will reduce total energy consumption by de-
creasing the temperature of the cycle setting by 10% after the
initial temperature setting has been reached.
Signal
Pressing the Signal keypad will change the end of cycle signal
volume. There are four settings: Off, Low, Medium, High.
If the Anti-Wrinkle option is selected the signal will sound each
time the dryer tumbles.
Control Lock (Secure keypad)
Pressing and holding the Signal keypad for three seconds will
turn on the Control Lock. The Control Lock status light will be
lit. While Control Lock is on, no other keypad presses are al-
lowed. Press and hold the Signal keypad again to turn the op-
tion off.
Operating Your Dryer
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
12 Part No. D516891EN
Loading ...
Loading ...
Loading ...