Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
PROBLEM
Excessive
_tbration
Starterropehard
topOI
Loss of drive
Grass catcher
not filling (ifso
ecitdpl ')
Hard to push
CAUSE
1. Worn,bentor looseblade.
2. Bentenginecranksl'_L
1. Engineflywheelbrake ison
whencontrolbar isreleased.
2. Bent engine crankshaft.
3. Blade adapter broken.
4. Blade dragging in grass.
1. Drive wheels not turning
with drive control engaged.
2. Belt not driving
1, Cutting height too low.
2. Lifton blade wom off.
3. Catcher not venting air.
1. Grass is too high or wheel
heightistoolow,
2. Rear of lawn mower
housing or blade dragging
in grass.
3. Grass catcher too full.
4. Handle height position not
rightforyou.
CORRECTION
1. Replaceblade.T_hten
bladeboll
2, Contactan authorized
servicecenter.
1. Depresscontrolbarto
upperhandlebefore
pullingstarterrope.
2. Contactan authorized
servicecenter.
3. Replaceblade adapter.
4. Movelawnmowertocut
grassortohardsurface.
1. Adjust or replace drive control
cable.
2. Put belt on pulleys or
replace belts if broken.
1. Raise cutting height.
2. Replace blade.
3. Clean grass catcher.
1. Raise cutting height.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle heightto
suit.
18
Loading ...
Loading ...
Loading ...