Loading ...
Loading ...
Loading ...
22
The salt reservoir is located on the inside of the
drawer next to the detergent dispenser. It holds up to
approximately 0.88lb (400g) of salt (actual capacity
will vary depending on brand and grain size of
salt used).
Double models: each drawer has a separate reservoir.
WATER SOFTENER (SOME MODELS ONLY)
When to refill the salt reservoir
If the salt indicator is red, the salt reservoir must be filled. If the salt indicator is black,
there is enough salt in the reservoir. After initially filling the reservoir, approximately 0.55lb
(250g) of salt should be added each time a refill is required. This will ensure a high salt
concentration is maintained to achieve optimal performance.
Using the salt reservoir
Refer to the 'Water hardness recommendations' table to determine the best water hardness
setting. You may hear some noises when the water softener is operating, this is normal.
The salt reservoir must always be filled with granular salt designed for dishwasher water
softening. We do not recommend the use of cooking salt like table salt, rock salt or pellets
as they may contain impurities that will damage the water softener. Do not add detergent
or rinse aid to the salt reservoir. This will cause damage.
Turn the cap anticlockwise to remove.
1
2
Attach the salt funnel to the DishDrawer™
Dishwasher and carefully pour salt into
the reservoir.
Remove the salt funnel and refit the cap,
turning clockwise until secure. After filling the
salt reservoir, run a
RINSE cycle to remove any
displaced water or spilt granules.
When filling the salt reservoir you may notice water
being displaced. This is normal.
indicator
salt reservoir
Loading ...
Loading ...
Loading ...