Loading ...
Loading ...
Loading ...
After cleaning, test your alarm by using the test button. If cleaning does
not restore the alarm to normal operation, the alarm should be replaced.
• Never use detergent or other solvents to clean the unit.
• Avoid spraying air freshener, hair spray, or other aerosols near the alarm.
• Do not paint the unit. Paint will seal the vents and interfere with the
sensor’s ability to detect smoke and CO.
• Never attempt to disassemble the unit or clean inside. This action will
void your warranty.
• The following substances can affect the CO sensor and may cause false read-
ings and damage to the sensor: Methane, propane, isobutane, iso-propanol,
ethyl acetate, hydrogen sulfide, sulfide dioxides, alcohol based products,
paints, thinner, solvents, adhesives, hair spray, after shave, perfume, and
some cleaning agents.
• Move the Smoke/CO Alarm and place in another location prior to performing
any of the following:
• Staining or stripping wood floors or furniture
• Painting
• Wall papering
• Using adhesives
Storing the unit in a plastic bag during any of the above projects will protect the
sensors from damage. When household cleaning supplies or similar contami-
nates are used, the area must be well ventilated.
WARNING: Reinstall the Smoke/CO Alarm as soon as possible
to ensure continuous protection.
Loading ...
Loading ...
Loading ...