Loading ...
Loading ...
Loading ...
PROBLEM
WATER WON'T
DRAIN
WATER LEAKS
WASHER IS NOISY
POSSIBLE CAUSE AND REMEDY
• Make sure drain hose is not kinked•
• Top of drain outlet should be less than 8 ft. above floor.
,Make sure hose connectionsare tight at faucets.
• Make sure end of drain hose is correctlyinsertedin and securedto drain facility.
• Make sure washer is level and firm to the floor with rubber footpads in place and
front jam nuts tight. See your Instigation Instructions.
o A sharp distinctive sound will be heard at the end of each spin period as the motor
stops and the spin brake inside the transmission "locks in" This sound is normal:
• Heavily unbalanced loads can cause the washer to vibrate excessively during spin,
and may cause it to move from its original position. In extreme cases, (usually occurs
when washing a single, heavy item or a small load when water level is set higher than
necessary) the spin basket may strike the outer rob, creating a loud but harmless noise.
To correct, open the lid and redistribute the load evenly about the wash basket. Close
the lid and restart•
WASHER PAUSES . Washer normally pauses between washing steps.., such as between wash and spin or
1NCYCLE between spin and rinse.
Ifvou need more help., call, toll free:
The GE Answer Center ®
800.626.2000
consumer information service
25
Loading ...
Loading ...
Loading ...