Loading ...
Loading ...
Loading ...
6
E. MAINTENANCE AND STORAGE
With use, the filter and honeycomb pad will become clogged with dust,
which will greatly affect the unit’s performance. Sometimes mold and
mildew may also occur, due to lack of water changes. It is recommended
to clean the filter and honeycomb pad once every two weeks.
1. Turn unit off and disconnect power.
2. Remove the screw of the rear cover.
3. Remove filter and honeycomb pad.
4. Wash the filter in a mild detergent and warm water solution and rinse
with clean water.
5. Wash the honeycomb pad with clean water only. A soft brush can be
used for cleaning.
6. Replace the honeycomb pad, filter and screw to fix the position.
The water tank should be cleaned periodically:
1. With unit powered off and unplugged.
2. Remove screws of the filter net and take out the filter and
honeycomb pad.
3. Unplug the rubber plug in the water tank and clean tank with brush or
cloth.
Before putting unit away for storage, please clean filter, honey comb pad
and water tank. Allow to dry completely before replacing. Then run the
unit in fan only mode for 30 minutes or so to dry the inside. This will
prevent mold and mildew growth.
Loading ...
Loading ...
Loading ...