Loading ...
Loading ...
Loading ...
To Use DUAL and TRIPLE:
1. Push in and turn knob from the OFF position to the DUAL or
TRIPLE zone anywhere between LO and HI.
2. Turn knob to OFF when finished.
7_/:> _,::: * * 5,
A. Downdraft vent cover
B. Filter
C. Vent fan location
(not visible in graphic)
The downdraft vent system consists of a vent cover, filter and a
vent fan. The vent system removes cooking vapors, odors and
smoke from foods prepared on the cooktop.
Do not run the vent system without the filter.
The downdraft vent cover and filter should be cleaned often to
prevent grease buildup. See "General Cleaning" section for more
information.
To Use Vent System:
1. Turn vent fan knob to the desired setting. The fan can be set
to the HI, MED or LO position.
FAN
OFF
Med
2. Turn vent fan knob to the OFF position when finished
cooking, or when the cooktop is not in use.
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a
well-fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base they can leave permanent marks on the cooktop or
grates.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has
the same characteristics as its base material. For example,
aluminum cookware with a nonstick finish will take on the
properties of aluminum.
Use the following chart as a guide for cookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum • Heats quickly and evenly.
• Suitable for all types of cooking.
• Medium or heavy thickness is best for
most cooking tasks.
Cast iron • Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
Ceramic or • Follow manufacturer's instructions.
Ceramic glass • Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
Copper • Heats very quickly and evenly.
Earthenware • Follow manufacturer's instructions.
• Use on low heat settings.
Porcelain • See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless steel • Heats quickly, but unevenly.
• A core or base of aluminum or copper
on stainless steel provides even
heating.
When canning for long periods, alternate the use of surface
cooking areas, elements or surface burners between batches.
This allows time for the most recently used areas to cool.
• Center the canner on the grate or largest surface cooking
area or element. Canners should not extend more than
1/2"(1.3 cm) outside the cooking area.
• Do not place canner on 2 surface cooking areas, elements or
surface burners at the same time.
• On ceramic glass models, use only flat-bottomed canners.
• For more information, contact your local agricultural
department. Companies that manufacture home canning
products can also offer assistance.
Loading ...
Loading ...
Loading ...