Loading ...
Loading ...
Loading ...
Drying Procedures
Follow fabriccare label instructions,
J
]777+:;+7 t
_,_, .....
;f;!7;i _7_7-. •
Place small items in a mesh bag.
Fill d_yer drum +113to 112f_ll,
Follow the guidelines below for preparing the load for drying.
Readthe Operating _nstructions card for operating your specific model.
Alway_ read and follow fabric care labels and laundry product tabeis,
_To reduce the risk of fire, electrical shock, or injury to persons, read
_mportantSafety_nstructions, pages 2-3, before operating this dryer.
Prepare items for drying.
• Dry items of similar fabric, weight and construction in the same load.
Separate dark items from light<olored items. Separate items that shed lint
from those that attract lint. If an item sheds lint, turn it inside out.
Besurebuckles, buttonsand trim are heatproof andwon't damagethe drum
finish. Closezippers,fasten hooks and Velcro@qike fasteners. Tiestringsand
sashesto prevent snagging and tangling.
If possible, turn pockets inside out for even drying.
Check for stainswhich may not have been removed inwashing. Dryer heat
may permanently set some stains. Repeat stain removal process before
drying.
Placesmall items in a mesh bag to prevent tangling and for easy removal.
2. Check that lint screen is clean and in place.
.
Load the dryer.
Theaverage load will fillthe drum I/3 to 1/2full. Items needroom totumble
freely for even drying and lesswrinkling. Do not oveHoad dryer.
When drying large items, dry only2 or 3at atime. Fillout the load with small
and medium sized items.
Fordelicate or verysmall loads, add 2 lint-free towels for better drying, less
wrinkling, and to prevent grease stains caused by fabric softener sheets.
Do not overdry items. Overdrying cancausewrinkling, shrinkage, harshness,
and abuild-up of static electricity, which can produce more lint.
If desired, add a dryer fabric softener sheet.
4. Close the dryer door and set dryer controls (some models).
See Operating _nstructions (:arc]for your specific model controls.
5. Turn cycle selector clockwise to the desired setting.
6. Start the dryer.
• PushStart button for 2 seconds.
Toadd or remove itemswhen the dryer isrunning, open the door. The dryer
will always stop when the door is opened. Allow the drum to come to a
complete stop before reaching inside.
To restart dryer, close the door, then pushthe STARTbutton for 2 seconds.
.
• The dryer will not start if the cycle selector is in the OFFposition.
When the cycle ends, remove items immediately and hang
Of fold, If load is removed before the cycle ends, turn cycle selector to OFF.
Loading ...
Loading ...
Loading ...