Kenmore 11045966403 Elite washer

User Manual - Page 12

For 11045966403.

PDF File Manual, 76 pages, Download pdf file

Loading ...
Loading ...
Loading ...
WASHER USE
WASH CYCLES
STATUS ES IMAm I
CUSTOM I_,!_i/!;;,,_,/IH_ MODIFIERS
A;_ _,,_r _ O PROGRAM HEAVY NORMAL /
@ 0AS°A,O (;i;>
D_ _ @ Aue I_,,,,Ce., a
¢:/ H _ D DELAY
OPTIONS
o
EXTRA HOT I COLD ® HIGH
_..e_ ®HEAVY HOT/COLD MEDIUM
RI 0
0 NORMAL
S_I RINSE & SPIN WHITEST SANITARY LIGHT PREWASH WARM / WARM LOW
C_i;sC[A O _eb WHITES
/_ _ _ ® WARM/COLD oEXTRALOW
C) _ttJ: )0 DRAIN&SPIN _ _/
p_ss _. io,) ?
)0,1 0L:K= •Sl¢O )S _ICCa SOIL LEVEL EXTENDED SPIN ® COLD / COLD @ NO SPIN
ur_t eKe N I_lt HANDWASH/
END of CYCLE WATER TEMP SPIN SPEED
LJNI OC_ rJOOR
2ND RINSE
NORMAL RINSE
0
RINSE
OR_ONR
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to using your washer. Please refer to
other sections of this manual for more detailed information.
Do not store laundry additives on the top surface of this washer.
Vibration is normal during operation.
Use only High Efficiency detergents. The package for this type of
detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times and reduced rinsing performance.
If may also result in component failures and noticeable mold or
mildew. HE detergents are made to produce the right amount of
suds for the Best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use.
Use only "HE" High Efficiency detergent.
First Wash Cycle Without Laundry
Before washing clothes for the first time, choose the Normal/
Casual cycle and run it without clothes. Use _/2the manufacturer's
recommended amount of powdered or liquid High Efficiency (HE)
detergent for a medium size load. This initial cycle serves to
ensure the interior is clean before washing clothes.
1. To load the washer
Open the washer door by pulling on the handle. Sort laundry
according to color and type of fabric. Place a load of sorted
clothes in the washer. Do not overload washer. Overloading
can cause poor cleaning.
The washer can be fully loaded, but not tightly packed.
Washer door should close easily.
Mix large and small items. Avoid washing a single item.
Load evenly.
Wash small items, such as infant socks, in mesh garment
bags. It is a recommended that more than one garment
bag be used and that each garment bag be filled with
equal amounts of material.
When unloading garments, occasionally check under the
gray colored seal at the front of the tub for small items.
2. Close the washer door by pushing it firmly until the lock
clicks. The washer door will remain locked during the wash
cycle.
NOTE: After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin. The
door can be opened only if PAUSE/CANCEL is selected while
the ADD A GARMENT light is glowing or if the cycle has been
canceled. See "To cancel a cycle" in "Changing Cycles,
Options and Modifiers" section.
3. Open the dispenser drawer and add laundry additives to the
detergent, bleach, or fabric softener compartments. Close
drawer slowly to avoid spills. See "Using the Dispenser."
4. Turn on the washer by selecting one of the WASH CYCLES.
The indicator light for the selected cycle will glow. When
selecting a Wash Cycle, the preset options, Water Temp, Spin
Speed, and Soil Level for the selected cycle will glow. The
display shows the estimated time remaining. The preset
settings provide the recommended fabric care for the
selected cycle. See "Cycles."
5. Select the desired OPTIONS. Not all Options are available
with all cycles. See "Options."
6. Select the desired MODIFIERS. Not all Modifiers are available
with all Cycles and Options. See "Modifiers."
12
Loading ...
Loading ...
Loading ...