Loading ...
Loading ...
Loading ...
18
HIGH VOLTAGE
HIGH TEMPERATURE HIGH PRESSURE
WARNING ŹThe projector uses a high-pressure mercury glass lamp. The
lamp can break with a loud bang, or burn out, if jolted or scratched, handled
while hot, or worn over time. Note that each lamp has a different lifetime, and
some may burst or burn out soon after you start using them. In addition, if the
EXOEEXUVWVLWLVSRVVLEOHIRUVKDUGVRIJODVVWRÀ\LQWRWKHODPSKRXVLQJDQG
IRUJDVFRQWDLQLQJPHUFXU\DQGGXVWFRQWDLQLQJ¿QHSDUWLFOHVRIJODVVWRHVFDSH
from the projector’s vent holes.
ŹAbout disposal of a lamp: This product contains a mercury lamp; do not put
it in a trash. Dispose of it in accordance with environmental laws.
)RUODPSUHF\FOLQJJRWRwww.lamprecycle.org (in the US).
)RUSURGXFWGLVSRVDOFRQVXOW\RXUORFDOJRYHUQPHQWDJHQF\
or www.eiae.org (in the US) or www.epsc.ca (in Canada).
)RUPRUHLQIRUPDWLRQDVN\RXUGHDOHU
• If the lamp should break (it will make a loud bang when it does),
unplug the power cord from the outlet, and make sure to request a
replacement lamp from your local dealer. Note that shards of glass
could damage the projector’s internals, or cause injury during handling,
so please do not try to clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does),
ventilate the room well, and make sure not to inhale the gas or fine
particles that come out from the projector's vent holes, and not to get
them into your eyes or mouth.
%HIRUHUHSODFLQJWKHODPSWXUQWKHSURMHFWRURIIDQGXQSOXJWKHSRZHU
cord, then wait at least 45 minutes for the lamp to cool sufficiently.
+DQGOLQJWKHODPSZKLOHKRWFDQFDXVHEXUQVDVZHOODVGDPDJLQJWKHODPS
• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp cover while the projector is suspended from
a ceiling. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in
high places is dangerous, so ask your local dealer to have the lamp
replaced even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. At the lamp
replacing, make sure that the screws are screwed in firmly. Loose
screws could result in damage or injury.
• Use only the lamp of the specified type. Use of a lamp that does not
PHHWWKHODPSVSHFL¿FDWLRQVIRUWKLVPRGHOFRXOGFDXVHD¿UHGDPDJHRU
shorten the life of this product.
• If the lamp breaks soon after the first time it is used, it is possible
that there are electrical problems elsewhere besides the lamp. If this
happens, consult your local dealer or a service representative.
•
+DQGOHZLWKFDUHMROWLQJRUVFUDWFKLQJFRXOGFDXVHWKHODPSEXOEWREXUVWGXULQJXVH
• Using the lamp for long periods of time, could cause it dark, not to light
up or to burst. When the pictures appear dark, or when the color tone
is poor, please replace the lamp as soon as possible. Do not use old
(used) lamps; this is a cause of breakage.
Disconnect
the plug
from the
power
outlet
Replacing the lamp (continued)
Loading ...
Loading ...
Loading ...