Loading ...
Loading ...
Loading ...
4
■ To add rinse aid, open the dispenser
lid by gently pushing in the center of
the lid with your thumb while lifting up
on the edge.
■ Pour rinse aid into the opening until
the indicator level shows that it is full.
Do not ll the reservoir above the full
level indicator. Excess rinse aid can
cause suds and water to overow
during the wash cycle.
■ Close dispenser by pushing down
gently on the lid until it clicks into
place.
5. Select a cycle
Press the Cycles button to scroll through the
available cycles. The indicator light next
to the cycle name will illuminate when that
cycle is selected.
NOTE: Heavier cycles and options lengthen
cycle times. Choose a cycle appropriate for
the food soils and dishes that you load. See
the cycle descriptions in the Cycle Guide.
6. Select options
You can customize your cycles by selecting
options. Press the Options button to add Hi Temp
wash or Heated Dry to the cycle. The indicator
light next to the option name will illuminate when
that option is selected. Continue to press the
button until each option is selected or deselected
as desired. Not all options are available for every
cycle. If an invalid option is selected for a given
cycle, the lights will ash. Adding options may
increase the cycle time.
7. Start or resume a cycle
NOTE: If needed, run hot water at the sink nearest your
dishwasher until the water is hot. Turn off water. With
door rmly closed press the START/Cancel button.
IMPORTANT: If the door is opened for any reason after the cycle is
started (even during the delay time), the Start/Cancel button must
be pressed again after the door is closed. If Start/Cancel button is
not pressed, the cycle will not resume.
8. Follow the progress of your
dishwasher
The display will indicate the time remaining to complete the cycle.
When the cycle is complete, the Complete light will remain on until
the door is opened and closed or the Start/Cancel button is pressed.
CYCLE GUIDE
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for
the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically
compensate by adding time, heat, and water as needed.
The dishwasher remembers the cycle and options selections from the most recently completed cycle. To run the same cycle and options as the
last time, press the START/Cancel button twice—once to wake up the controls, and again to start the dishwasher.
CYCLES ESTIMATED
WASH TIME
W/O OPTIONS
HH:MM
WATER USAGE
GALLONS
(LITERS)
Use for hard-to-clean, heavily soiled pots, pans, casseroles, and regular tableware.
Includes Heated Dry option.
2:35 5.1 G
(19.2 L)
This cycle is recommended for daily, regular, or typical use to completely wash and dry
a full load of normally soiled dishes. This dishwasher’s government energy certications
were based on the Normal cycle with only the Heated Dry option selected.*
1:35 - 2:10 2.5 - 4.8 G
(9.3 - 18.0 L)
For lightly soiled loads such as glasses, crystal, and ne china. Includes Heated Dry option.
1:45 4.0 G
(15.0 L)
For fast results, the Quick cycle will clean lightly soiled loads that do not need drying.
Includes Heated Dry option.
NOTE: Some detergents are not recommended for short wash cycles, please refer to your
detergent packaging for more information.
1:00 3.2 G
(12.3 L)
Use for rinsing dishes, glasses, and silverware that will not be washed right away. Do not
use detergent.
0:20 1.7 G
(6.5 L)
*No other washing and drying temperature options were selected, and the diswasher was not subjected to truncated testing. Rinse aid was not used, and there
was no detergent used in the prewash.
Loading ...
Loading ...
Loading ...