Loading ...
Loading ...
Loading ...
Automatic ice and
Water Dispenser
;: •|
Dispenser Selector
Pressglass against dispensing arm
Signal Arm
Ice Maker
The ice and water dispenser on the freezer door conveniently dispenses chilled
water and icecubes Tooperate the dispenser,slide the knob to the selection of your
choice and press a glass against the dispensing arm, asshown Be sure to hold the
glassasfar upaspossibleto catchall cubes. Tostop dispensing, pull glassawayfrom
dispensing arm. Releasedispensing arm before the glass isfull, but do not remove
the glass until the ice hascompletely dispensed
A small heated area beneath the dispenser floor catches and evaporates small spills
Do not pour water or excess cubes into this area because there isno drain
Light
The dispenser has a light which can be turned on and off bysliding the knob to the
desired position, The light also turns on automatically when ice and/or water is
dispensed Replace light bulb with an appliance bulb of the same wattage
How the Water Dispenser Works
The water tank is located behind the drawers in the refrigerator compartment As
the water isdispensed, the tank isautomatically refilled Forproper operation of the
dispenser, the supply water pressure must fall between 30 psi and t20 psi
After the Refrigerator isinstalled and the plumbing connections are complete, the
water tank should be filled by drawing one glass of water. This will take about
1-1/2 minutes.Then, draw and discard 7 more glassesto be sure that the tank and
plumbing connections are rinsed of any impurities
To ensure fresh-tasting water, plan to usethe dispenser every day If the water
dispenser has not been used for a week or more, draw and discard 7-8 glassesto
freshen the tank supply.
How the Ice Dispenser Works
The icemaker and icestorage bin are located in the top left corner of the freezer
compartment. After the refrigerator isinstalled properly and has cooled for several
hours, the ice maker can begin making ice,To begin iceproduction, lower the wire
signal arm to the "down" or ON position Ascubes are made, they are stored in the
storage bin Although it may take 1 or 2 days to fill the bin, the dispenser may be
usedafter the first batch of iceismade, The icemaker turns off automatically when
the ice storage bin isfull
Becauseof new plumbing connections, the first production of ice cubes may be
discolored or have an odd flavor, Theseshould be discarded until the cubes made
are free of discoloration and taste, _ Remember, water quality
determines your ice quality It isbest to connect the ice maker to water that isnot
softened Chemicals from a malfunctioning softener can damage the ice maken
If ice maker is connected to soft water, ensure the softener is maintained and
working properly,
To stop the ice maker, lift the wire signal arm until it clicks and locks in the "up" or
OFF position,
Loading ...
Loading ...
Loading ...