Loading ...
Loading ...
Loading ...
11
Power consumption
Auto-Off
•
Auto-Off is enabled when the printer is turned on and connected to a power bank, if the printer does not have
network, fax or Wi-Fi Direct capability, or is not using these capabilities.
Auto-Off is disabled when this product is connected to a wall outlet power supply, to a a printer’s wireless or
Wi-Fi Direct capability is turned on or when a printer with fax, USB, or Ethernet network capability establishes a
fax, USB, or Ethernet network connection.
•
Tip: To conserve power bank power, you can enable Auto-Off, even when the printer is connected or wireless is turned
on.
Power cord instructions
Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The
product uses either 100-240 V AC or 200-240 V AC and 50/60 Hz.
CAUTION: To prevent damage to the product, use only the power cord that is provided with the product.
• Power Consumption
•
• Sleep Mode
Auto-Off
Environmental Product Stewardship Program
For regulatory, environmental, and safety notices, refer to the included sheet in your product packaging and the
following statements. This section contains the follow topics:
Additional ENERGY STAR certied imaging product model information is listed at: http://www.hp.com/go/energystar.
HP printing and imaging equipment marked with the ENERGY STAR® logo is certied by the U.S. Environmental
Protection Agency. The following mark will appear on ENERGY STAR certied imaging products:
This feature turns the printer off after 2 hours of inactivity to help reduce energy use, only when connected to the
HP Sprocket Studio Power Bank. Auto-Off turns the printer off completely, so you must use the Power button to turn
the printer back on. If your printer supports this energy saving feature, Auto-Off is automatically enabled or disabled
depending on printer capabilities and connection options. Even when Auto-Off is disabled, the printer enters Sleep
mode after 10, 5, or 3 minutes of inactivity to help reduce energy use (set in the Sprocket app). By default, Auto-off is
disabled when connected to a wall outlet power supply.
Loading ...