Loading ...
Loading ...
Loading ...
Always unplug the electrical power cord from the waft outlet before cieaninq. Keep your refrigerator and freezer
clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at least twice a year. Never use
any type of scouring pads, brushes, abrasive cleaners or strong aUkaHnesoUutionson any surface. Do not wash any
removable parts in a dishwasher.
o When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may
damage the floor. Be careful not to move the refrigerator beyond the plumbing connections.
- Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
- To avoid damage and help the refrigerator run as efficiently as possible, clean the condenser periodically.
® Never use CHLORIDE to cmeanstainless steel.
NOTES:
Turning the freezer and fresh food controls to "O" turns off the compressor, but does not disconnect electrical
power to the light bulb or other electrical components.To turn off power to your refrigerator, you must unplug the
power cord from the waUloutlet.
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing
adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild
detergent, or. touch the glue residue with the sticky side of tape you have already removed. Do not remove the
serial plate.
Care & Cleaning Table
Part Cleaning Agents Tips and Precautions
Interior/Door • Soap and water Use 2 tablespoons of baking soda in 1 quart of warm water. Be
Liner • Baking soda and sure to wring excess water out of sponge or cloth before
water cleaning around controls, light bulb or any electrical part.
Door Gaskets . Soap and water Wipe gaskets with a clean soft cloth.
Drawers/Bins • Soap and water Do not wash any removable items (bins, drawers, etc.) in
dishwasher.
Glass • Soap and water Allow glass to warm to room temperature before immersing in
Shelves • Glass cleaner warm water.
• Mild liquid sprays
Toe Grille • Soap and water Vacuum dust from front of toe grille. Remove toe grille (See
• Mild liquid sprays illustration on page 5). Vacuum backside and wipe with sudsy
• Vacuum attachment cloth or sponge. Rinse and dry.
Exterior and • Soap and water Do not use commercial household cleaners, ammonia, or alcohol
Handles to clean handles.
Exterior and _ Never use CHLORIDE to clean stainless steel.
Handles • Soap and water
(Stainless • Ammonia Clean stainless steel front and handles with soapy water. Use
Steel Models • Stainless Steel ammonia on stubborn spots. Use a non-abrasive stainless steel
Only) Cleaners cleaner. These cleaners can be purchased at most home
improvement or major department stores.
Condenser • Vacuum attachment Use the dusting tool attachment on your vacuum to remove dust
Coils build-up on the condenser coils (see item "J" in illustration on page
17 for location).
18
Loading ...
Loading ...
Loading ...