Loading ...
Loading ...
Loading ...
English
6
Attaching High Pressure Hose (Fig. I- K)
NOTICE: Never pull water supply hose to move
pressure washer. This could damage hose and/or
pumpinlet.
1. To connect the high pressure hose
1
to the spray
handle
3
, screw the hose collar
41
onto the inlet
coupler
42
.
2. To connect the high pressure hose to the pressure
washer unit
7
, screw the hose collar
41
onto the high
pressure water outlet
43
.
nOTE: Uncoil the high pressure hose before installation
to preventkinks.
nOTE: Avoid cross threading when installing the hose.
Cross threading will causeleaks.
Fig.K
Attaching Garden Hose (Fig. K)
1. To connect a garden hose to the pressure washer unit
7
,
place the end of a garden hose
44
inside the water
intake
10
. Tighten the garden hose byhand.
2. Always disconnect the garden hose afterusage.
nOTE: Before connecting the garden hose to the
pressure washer unit, run water through the garden
hose for thirty seconds to clear any debris from the
mouth of thegarden pressurehose.
Fig.I
1
41
42
Fig.J
43
3
44
10
7
Spray Tip Application
15° Orange Nozzle For brick or masonry.
25° Green Nozzle For vinyl siding.
40° White Nozzle For automotive washing.
Soap Nozzle For gentle wide area cleaning.
Black Turbo Nozzle For abrasive cleaning.
Attaching Nozzles (Fig. L)
DANGER: Risk of fluid injection. Do not direct
discharge stream toward persons, unprotected skin,
eyes or any pets or animals. Serious injury willoccur.
WARNING: Flying objects could cause risk of serious
injury. DO NOT attempt to change nozzles while
pressure washer is running. Turn pressure washer unit
OFF before changingnozzles.
1. To connect a nozzle to the spray wand
2
, pull the quick
connect collar
45
toward the spray wand and insert the
appropriate nozzle.
2. Release the quick connect collar to lock the nozzle
inplace.
3. To ensure nozzle is locked into place, give the nozzle
a firm tug after the quick connect collar has locked
intoplace.
Fig. L
2
45
Loading ...
Loading ...
Loading ...