Loading ...
Loading ...
Loading ...
BLAZE Instructional Book
Page | 25
FIRST-TIME OPERATION
Caution: Never operate the appliance unattended. The surface is extremely hot and someone can touch the
hot surface and get seriously burned. All gas appliances should be attended at all times.
Prior to using your appliance, verify that all of the following is correct:
The burner heads are free of any debris or obstruction.
Installation of the proper gas type and regulator settings.
The proper gas connection is complete.
Check for gas leaks.
Minimum clearances are maintained.
All packaging has been removed.
All parts and components are properly in place.
An installer-supplied manual gas shut-off valve is fully accessible.
LP/NG hose is clean and inspected for cuts, wear, abrasion, or leaks. Replace if necessary with
a suitable
UL, ETL or CSA Listed part with internally threaded connector.
Lighting the Appliance
1.
Remove the top stainless steel cover.
2.
Use caution when lighting burners by standing as far away from the burners as possible. Do not put
your hands, arms, head or any body parts close to the appliance when lighting.
3.
To ignite burners, push the burner knob in and slowly rotate counter-clockwise to the high position.
4.
You will hear a loud click as the electronic lighter produces a spark. Listen for the sound of the gas
igniting
and look for a flame through the cooking grate. If the burner does not light on the first try,
repeat
immediately.
5.
If the burner does not light in 5 seconds, turn the burners off and wait five minutes with the lid off until
Loading ...
Loading ...
Loading ...