Loading ...
Loading ...
By pressing the and buttons, it is possible to select the desired
option and conrm it with the button.
The rst time the machine is switched on, you will be asked to select the
language and the display will automatically display the language selection
menu.
To select the desired language, press the and buttons; to conrm
the selection, press the button.
Area A will display the following: the icon and selected washing
programme, the washing phases and the time remaining to the end of the
wash cycle.
Area B will display the AutoDose status, the selected options, the energy
and water consumption for the chosen cycle and the button lock symbol.
Area C will display the default temperature value on the basis of the set
programme; if the programme does not include the setting of the
temperature, the area will display the “-- °” symbol.
Area D will display the default spin cycle speed on the basis of the set
programme; if the programme does not include the setting of the spin
cycle, the area will display the “--” symbol.
Area E will display the time remaining to the start of the selected
programme if the DELAYED START function was set.
Pressing button F allows for accessing the menu from which to set Auto
Dosing option.
Pressing button G allows for accessing the menu from which to set
additional washing options.
Pressing and holding button G for 3 seconds allows for accessing the
settings menu:
- Language: by pressing the and buttons, the user can select the
desired language and conrm it with the button.
- Sound: by pressing the and buttons, the user can activate or
deactivate the sound of the buttons and conrm it with the button.
- Display brightness: by pressing the and buttons, the user can
select the type of display brightness and conrm it with the button.
- Autodose: By pressing the buttons and the user can choose from
three dierent levels of detergent usage.
By default, the system will use a dose of 25ml of detergent for each cycle.
Select 25ml for highly concentrated detergent as recommended dosing
value on deterget package for medium loads of 4Kg-5Kg is <30ml.
Select 35ml for medium concentrated detergent as recommended dosing
value on deterget package for medium loads of 4Kg-5Kg is 30-40ml.
Select 45ml for low concentrated detergent as recommended dosing value
on deterget package for medium loads of 4Kg-5Kg is >40ml.
Ensure you adjust the preset dosing value to the correct level, corresponding
to the recomended values indicated on the detergent package that you
intend to use, considering a medium load (4Kg-5Kg).
This option is not valid for adjustment of softner concentration.
- Restoring the factory settings: pressing and holding the button for 2
seconds restores the factory settings.
! During a wash cycle if the user does not interact with the display for 5
minutes, the SCREEN SAVER will activate. To return to the previous window,
simply press any button.
DISPLAY INDICATORS
Failure: Call Service
Refer to Troubleshooting section
Failure: Drain pump lter clogged
Water cannot be drained; drain pump lter might be blocked
Failure: No water
No or not sucient inlet water.
In the event of any failure, refer to the “Troubleshooting” section.
Key Lock
To activate the control panel lock, press and hold the button for
roughly 3 seconds. When the display visualises “KEY LOCK”, the control
panel is locked (except for the ON/OFF button ). This will prevent
accidental modications to wash cycles, especially when children are at
home. To deactivate the control panel lock, press and hold the
button for approximately 3 seconds.
Locked door indicator
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened.
FIRSTTIME USE
Once the appliance has been installed, and before you use it for the rst
time, run a wash cycle with detergent and no laundry, using the wash
cycle Cotton (60°) without option Prewash selected.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button ; “HOTPOINT” will appear on the display.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Push to open the detergent dispenser drawer and pour the detergent
into the relevant compartments, as described in the “DETERGENT
DISPENSER DRAWER” section.
- Close the door.
- The machine automatically selects the default temperature and spin
speed set for the selected wash cycle.
- Select the desired wash cycle.
- Select the desired options.
- Press the START/PAUSE button to start the wash cycle; the door will
lock ( symbol on). Once the cycle starts, the Sensing routine will begin:
the drum will move and then door will be unlocked and locked again to
start properly the washing cycle.
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again. To start
the wash cycle from the point at which it was interrupted, press the
START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle. If the
symbol is not lit, the door may be opened. Press the START/PAUSE
button again to continue the cycle. Once the cycle starts, the Sensing
routine will begin: the drum will move and then door will be unlocked
and locked again to start properly the washing cycle.
STOP&ADD
An icon on the display will signal when additional garments can be
introduced into the washing machine, without decreasing the washing
performance. To add garments, rst stop the washing machine by
pressing the START/PAUSE button then open the door and insert
them.
Press the START/PAUSE button again to restart the wash cycle from
the point at which it was interrupted.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button, then select the desired cycle and press
the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold for a few
seconds the ON/OFF button. If water is present then drain function will
start. The cycle will be stopped and the machine will switch o.
AT THE END OF THE WASH CYCLE
This will be indicated by the word “CYCLE END” on the display; when the
symbol switches o, the door may be opened. Open the door, unload the
laundry and switch o the machine. If you do not press ON/OFF button,
the washing machine will switch o automatically after about 10 minutes.
OPTIONS
- If the selected option is incompatible with the set wash cycle or with
another previously selected option, in the menu the name of
incompatible option is represented in grey color and the wording “Not
available” will appear on the display, accompanied by a buzzer, the
option will not be activated.
AutoDose
The automatic dosing system will intake the amount of liquid detergent
accordingly to the selected level and selected program, and it will ajust it
also to the load detected, while for the softner the system is automatically
adjusting in according to selected program and automatic load detected.
The intelligent dosing system has been activated at the factory for all the
designated programmes and can be deactivated for each one
individually.
In order to use intelligent dosing, ll the dispenser.
Note:
- Fill the dispenser only with suitable detergent and care products
- If you change the liquid detergent or fabric softener, empty and clean
the dispenser beforehand.
- Pour liquid detergent (Detergent) and fabric softener (Softener) into the
relevant dispensers every time the related icon is showing empty level.
Steam Finish
100% freshness with Steam: Steam Finish option is designed to keep your
garments fresh up to 6 hours after the cycle is over.
Innovative Steam Finish system takes care of your garments inside the
washing machine with delicate steaming and tumbling action (tested by
SSOG lab). Steam Finish system gently massages the laundry with regular
slow movements alternated with steam actions - letting air circulate
inside the bers to keep garments fresh and prevent bad odours. Steam
Finish treatment leaves truly fresher clothes and peace of mind - even
hours after the end of the cycle. Steam Finish treatment inhibits the
proliferation of the main bad odour sources (inside the washing machine)
up to 6 hours after the washing ends. Not compatible with programmes
designed for delicate garments and duvets.
Rapid
Select this option to reduce the cycle time. This cycle is suggested for
washing light soiled clothes.
Steam Hygiene
This option enhances washing performance by generating steam during
the wash cycle to remove any bacteria from the bres, which are treated
at the same time. Place the laundry in the drum, choose a compatible
programme and select option Steam Hygiene.
! The steam generated during the operation of the washing machine may
cause the porthole door to become hazy.
Easy Iron
By selecting this function, the wash and the spin cycles will be modied in
order to reduce the formation of creases.
Multi Rinse
By selecting this option, the eciency of the rinse is increased and optimal
detergent removal is guaranteed. It is particularly useful for sensitive skin.
Press the button once, two or three times to select an additional 1, 2 or 3
rinses after the standard cycle rinse and remove all traces of detergent.
Loading ...
Loading ...
Loading ...