Loading ...
Loading ...
Loading ...
Delicate
Use this cycle to get extra-low heat to gently dry items such as lingerie, blouses, or washable
knit fabrics.
Sensor Preset Cycle Settings
Sensor Cycles Load Type Temperature
BULKY Medium
Jackets, comforters, pillows
HEAVY DUTY Regular*
Heavyweight mixed loads, cottons, jeans Medium heat is se[ectab[e as an
alternate temperature.
NORMAL Medium*
Corduroys, work clothes, sheets I.ow heat is se[ectab[e as an
alternate temperature.
WRINKLE CONTROL Low*
Business casual clothes, permanent press, synthetics Extra-low heat is se[ectab[e as
an alternate temperature.
DELICATE Extra-Low
I.ingerie, blouses, washable knit fabrics
*Preferred setting
Steam Cycles
Use Steam Cycles to help smooth out wrinkles from dry items, such as clothes that have been
worn or clothes that have been [eft in the dryer too long. When a Steam Cycle is selected, the
estimated time remaining display shows the actual time remaining in the cycle.
NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free
finish may yield better results than those without.
Use of a fabric softener sheet is not recommended with steam cycles as it may cause
temporary staining on the clothes.
Rapid Refresh Small Load
This cycle is best for smoothing out wrinkles and reducing odors from loads consisting of one
to four dry items of wrinkle-free cotton, cotton-polyester blend, common knits, and synthetic
garments. In this cycle, a small amount of water is sprayed into the dryer drum after several
minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief
coo[ down. The heat [eve[ and cycle time are not adjustable.
Custom Refresh
This cycle is best for touching up clothes that have been [eft in the dryer too long. In this
cycle, a small amount of water is sprayed into the dryer drum after several minutes of
tumbling with heat. The dryer will continue to tumble with heat followed by a brief coo[
down. The dry time and temperature can be adjusted for this cycle.
NOTE: Overloading the dryer may not yield the same results.
Steam Preset Cycle Settings
Timed Cycles Default Temperature* Default Time
Load Type (Minutes)*
RAPID REFRESH Small Load Medium 15
CUSTOM REFRESH Medium 20
*Temp I_eve[ and Time Adjust are se[ectab[e only for the Custom Refresh cycle.
NOTE:The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum
dry time of 40 minutes. Only the Medium and Regular temperature settings can be used
for the Custom Refresh cycle.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and a drying temperature. When
a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the cycle by pressing TIME
ADJUST + (plus) or - (minus). See "Changing Cycles, Modifiers, and Options."
NOTE: Timed Cycles may also be used with the drying rack. See "Drying Rack Option."
Timed Dry
Use this cycle to complete drying if items are still damp after a Sensor Cycle. Timed Dry is
also useful for drying heavyweight and bulky items, such as bedspreads, and work clothes.
Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low
temperature setting. Timed Dry can also be used with the drying rack.
Rapid Dry
Use this cycle for dying small loads that need short drying time.
Timed Preset Cycle Settings
Timed Cycles Default
Load Type Temperature
TIMED DRY High
Heavyweight, bulky items, work
clothes
Default Time
(Minutes)
4O
RAPID DRY Regular 23
Small loads
Loading ...
Loading ...
Loading ...