Loading ...
Loading ...
Loading ...
15
Trouble Shooting
If there is no water coming out from the Fontanella, please check the Control Box,
make sure that the Water Source Selection Switch is turned down to “Water Tank”
position. Therefore, Fontanella will input water from the “Water Tank.”
If the Cold Water is not cooling adequately, check the Thermostat Cooling Controller
located in the left side panel and follow instructions as outlined above (under “Cold
Water Temperature Adjustment”). This may also be due to dispensing too much cold
water in a short period of time. In this case, wait 15 minutes and the Cold Water shall
now be cold once more.
Note: The Fontanella produces 18 Litres of cold water per hour, approximately 1
Litre every 3 minutes.
If no sparkling is being dispensed, check to ensure the CO2 Canister is not empty. If
so, replace CO2 Canister as per previous instructions.
If any icon ashes continuously, turn the Control Scroll to the Cold Water Icon
setting and then turn off the power for a few minutes, then switch back on and dispense
a glass of cold water. If it continues ashing, call a Fontanella technician as it may be a
thermostat issue.
Loading ...