IMPORTANT INFORMATION
FOR NEW APPLIANCE OWNERS
Listed are the most commonly asked questions by our customers. Please take a moment to read this
important notice; it will provide you with additional information on how to operate and care for your new
appliance. We also urge you to read the Use and Care Guide. THANK YOU
Before using your oven (if equipped) for the first time, provide good ventilation of the room by opening a
window(s) or exterior door. Use a range vent hood if available. Turn the oven to ON at 400°F and allow oven to
heat for 30 minutes. This will allow for an initial burn-in period. During this time some emissions including
odors andlor a small amount of smoke may be generated from the binding agent which holds together the
fiberglass insulation around the oven.
Read the Cautions and Warnings throughout the Use and Care Guide. Consult your Use and Care Guide
for proper pan size and oven vent location.
Q. The cooktop surface seems too hot to touch while using
the surface burners, elements, warmer zone and/or the
oven; is this normal?
A. During operation, the cooktop surface will increase in tem-
perature. It's normal for heat to reflect from your cookware
and the surface burner or elements that heat the surround-
ing area. There is additional heat when the oven is in opera-
tion (if equipped).
Q. The right or left rear surface element gets warm when
operating the oven, although the element is not being
used.
A. The oven vent islocated under the right or left rear surface
element. During oven operation warm air rises through the
vent for proper air circulation in the oven and good baking
result. Do not line the burner drip bowl with aluminum foil,
doing sowill block oven venting. Also, it's not recommended
leaving empty pansor utensils on the right or left rear burner
during oven operation, they will get hot to touch. Ifyour range
has a "Smooth Top" glass cooking surface, the oven vent is
located at the rear/right or left of the top. Do not place any
plastic utensils in front of the vent or on the cooking surface.
They can become hot to touch, or melt.
Q. The element, on my ceramic glass smoothtop, goes on
and off all the time, is it normal?
A. Yes. The radiant element is working differently than the coil
element. The radiant element cycles on and off to maintain
the selected heat setting. To have better result, you may start
most of your cooking operation to high setting and low down
the setting after. For more information concerning element
setting refer to your Use and Care Guide.
Q. The glass of the cooktop surface (if equipped) turns to
green above the elements; is it normal? (White glass
cooktops only)
A. Due to the high intensity of heat generated by the surface
elements, the glass surface will turn green when the element
will be turned off. This phenomenon isnormal and the glass
will come back to its original white color after it has com-
pletely cooled down.
Qo
A.
I have uneven cooking result (surface element), is it nor-
mal?
One of reason why you don't have good result, it is because
you don't use flat bottom utensils. It is really important to
use the right utensil. For utensil selection, refer to your lit-
erature pack.
Q. The indicator lights for the cooktop elements stay red
even when knobs are at the off position, is it normal?
A. It isnormal. As long as sensor will fell heat, light will stay on.
When the surface will have cooled down, the indicator light
will go off.
Qo
A.
Qo
A.
The Electronic Oven Controller gives out sound signals
and displays a code between FI and FIO; is the EOC
defective?
Even though the Electronic Oven Controller isextremely re-
liable, avoltage drop or any other electric event may tempo-
rarily mislead the EOC and cause a functioning fault. Press
the CANCEL button to erase the message and to stop the
sound signals; reprogram the oven. If the same fault code
appears again in the display, note it, press the CANCEL but-
ton and contact an authorized service center.
My oven temperature seems too hot for some of my
recipes and not enough for some others; do I need a
new thermostat?
For peace of mind, your oven thermostat has been factory
calibrated and tested to ensure an accurate baking tempera-
ture. For the first few uses, follow your recipe times and tem-
perature recommendations carefully, and be sure to read the
Use and Care Guide for: baking, roasting and broiling sug-
gestions; proper utensils and their use; causes and cures of
common baking problems; safety measures and cleaning;
what to check before calling for service, as well as all the
other valuable information prepared to help you. If you feel
your oven is too hot or too cool from your baking experi-
ence, the oven temperature can be adjusted to your liking.
Refer to your Use and Care Guide for instructions on how
to adjust the temperature control.
318202315 (0009) Rev.A
Loading ...
