Style #2 - Insert one screw into
the mounting bracket - do not
tighten yet. Tuck electrical
wires into outlet box and
position fixture over the
mounting bracket. Line up the
screw in the bracket to to the
"7" hole on the fixture. Slide
fixture to secure in place. Insert
remaining screw. Tighten both
screws to secure.
5. Style #1 - Install proper
bulb type and wattage.
Remove the finishing screws
that are already on your fixture.
Position glass in place and
secure with finishing screws
Install the proper bulb type
and wattage (not included).
Style #2 - Remove spinner nut
from the socket. Place the
glass onto the fixture socket.
Use the special tool that comes
with your fixture to tighten the
spinner nut onto the socket to
secure the glass in place. Install
the proper bulb type and
wattage (not included).
Style #3 - Snap “pop off” head
or glass onto fixture (push, or
push and turn (it depends
on the style of your fixture)).
Install proper bulb type and
wattage (not included).
6. Install proper bulb type
and wattage (not included).
Install decorative ring.
1. Mount the mounting
bracket to outlet box using
outlet box screws (not included).
Make sure the studs or nipple on
the mounting bracket are facing
out from the outlet box.
2. Align the mounting bracket
so the fixture will be square.
Tighten the centre screw to lock
the mounting bracket in the
correct position.
3. Firmly attach the fixture
ground wire (bare copper) to
the mounting bracket with the
ground screw (by wrapping
around the ground screw) and
then connect it to the house
supply ground wire with a wire
nut. Connect the black wire (or
wire with marking) from the
fixture to the black wire in the
electrical box and connect the
white wire from the fixture to
the white wire in the electrical
box.
4. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
outlet box making sure no bare
wire (on the black and white) is
visible at the wire nuts.
Style #1 - Position fixture over
the mounting bracket. Line up
the screw holes in the bracket to
to the screw holes on the fixture.
Insert screws and tighten to
secure fixture in place.
T-10
06/12
INSTALLATION: NOTE: Product May Not Look Exactly As Shown In Figures.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (613) 342-8437
Mounting
Bracket
Outlet
Box
Outlet
Box Screws
(not included)
Fixture
Bracket
Screw
Fixture
Bracket
Screw (s)
Style #1
Style #2
CEILING/WALL
TRACK LIGHTING
Style #1
Style #2
Style #3
Fixture
Socket
Glass
Finishing
Screws
Glass
Spinner Nut
Fixture
Socket
Special
Tool
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
“Pop Off”
Head Or
Glass
Fixture
Socket
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3.
FIRMLY ATTACH THE FIXTURE GROUND WIRE (BARE COPPER) TO THE MOUNTING BRACKET WITH THE
GROUND SCREW (BY WRAPPING AROUND THE GROUND SCREW) AND THEN CONNECT IT TO THE
HOUSE SUPPLY GROUND WIRE WITH A WIRE NUT.
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French) Monday through Friday 8:00 AM to 5:00 PM E.S.T.
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
TOOLS AND MATERIALS REQUIRED:
Wire Cutters
Pliers Wrench
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
Phillips
Screwdriver
White
Black
House supply
Ground wire
Fixture
Ground wire
Fixture
head
Decorative
ring
