Loading ...
Loading ...
Loading ...
If your range hood is going to be used in extraction mode, then you should
connect the ducting hose to the ceiling adaptor at this point.
Fix the upper chimney section to the hanging plate, using the 4×ST4x6.
Slide the lower chimney section onto the angle bars and raise it until it sits just
below the upper chimney section.
Important: This stage of the installation process MUST be completed by two
people.
Important: The 16×M5x10 screws MUST be securely tightened.
Remove the hanging hook and then slide the lower chimney section down-
wards, until it rests against the main body of the range hood.
Live Smart, Better Life!
07
1(844) 334-4203
Loading ...
Loading ...
Loading ...