Loading ...
Loading ...
Loading ...
9
Once complete, ensure the outlet exhaust is attached to the window when using the
heating function. Reverse the process for cooling or dehumidification.
HUMIDIFYING
When using the humidifying function, remove the exhaust hose and fix the outlet grille
on the unit.
1. Fill the water filler and select humidifier function.
2. The unit will stop automatically after four hours of operation. Put water into the
water filler to restart operation.
3. The unit will stop humidifying if the ambient humidity is equal to the pre-set
humidity.
WATER DRAIN (Error code E4)
When the air conditioner is used, excess water condensation may be produced that will
fill the water tank. When the water tank is full, the unit will stop working and display an
E4 error code.
This means the unit will need to be drained as follows:
1. Switch off and unplug the unit.
2. Remove the water tank and pour out the water.
3. Put the water tank back to original position.
4. Restart the unit.
CONTINUOUS DRAINAGE
To continually drain the unit in dehumidifying mode, follow below steps:
1. Switch off and unplug the unit.
2. Remove the water tank and pour out the water.
3. Remove drain plug (Fig.1)
4. Plug draining tube to draining hole (Fig.2)
5. Put the water tank back to original position.
Loading ...
Loading ...
Loading ...