Loading ...
Loading ...
Loading ...
iBBB i
Check forLoose FaSteners _ fl/
ClearVInspectGrass Catcher
(If EO,uipped) I/
M
Clean Lawn Mower li/
O Clean Under Drive Cover
W; Power-PropelledMowers) t##
ERj ;beck drivebeWpulleys
power-PrOpelledMowers) I_
ChecldSba,'pen!ReplaceBlade !,/3
Lubrication Chart _
Clean Banery/Recha,'_
Electdc Start Mowers I_ 1_4
E Check En_ineOil Level
N oilange Engine Oil I/1,2
G Clean AirFilter I_ z
I Inspect Muffler
N Clean orReplace Spark Plug i##
E Replace Air Filter Paper Cartridge 11/2
1 . Change r¢_ore often when operahng urtder a heavy load of in high ambient t_mperatures
2. eel, ice mor_* often whon operating in dirty or dusty COndi[ions.
3. Repla¢o blades mote o_len when mowing _ sandy soil
4. Charge 48 ho_rs at end of season.
GENERAL RECOMMENDATIONS
The warranty on this lawn mower does
not cover items that have been subjected
to operator abuse or negligence. To _)Wheel adjuster
receive full value from the warranty,
operator must maintain mower as
instructed in this manual.
Some adiustments will need to be made
periodically to propedy maintain your
unit.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each oil
season.
Once a year, replace the spark plug,
clean or replace air filter element and
check blade for wear. A new spark
plug and clean/new air filter element
assures proper air-fuel mixture and
helps your engine run better and last
longer. _) Spray lubricant
Follow the maintenance schedule in
this manual,
BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRI-
CATION CHART").
LUBRICATION CHART
spring
bracket
_)Handle bracket
mounting pin
(_) Refer to maintenance "Engine" section.
IMPORTANT: Do not oil or grease
plastic wheel bearings, viscous lubri-
cants will attract dust and dirt that will
shorten the life of the self-lubricating
bearings, if you feel they must be
lubricated, use only a dry, powdered
graphite type lubricant sparingly,
10
Loading ...
Loading ...
Loading ...