Loading ...
Loading ...
Loading ...
12
Washing programmes*
* depends on the model
Sensitive
For washing fabrics with increased hygiene requirements or those that will
be used by allergy sufferers. The temperature remains constant during the
washing process. More intensive rinsing with increased water level. For
hard-wearing and easy-care fabrics made from cotton or linen.
Night Wash
Particularly quiet wash programme with a reduced final spin.
Sleep mode. Once the programme has finished, the display goes out, but
can be reactivated by pressing any button.
Drying programmes
Intensive Dry
Intensive drying for a (robust fabrics), at 90°C.
Gentle Dry
Gentle drying for ` (easy-care fabrics), 60°C.
Special programmes
Fluff Clean
This programme is designed to clean the drying cycle of any fluff
deposits. After 10 drying cycles, the washer-dryer uses the symbol
l (Fluff Clean) in the display panel to show that this programme should
be run. The electronic cycle counter is then automatically reset. The
l (Fluff Clean) symbol goes out after the programme starts.
To run the Fluff Clean, proceed as follows:
Make sure that the drum is completely empty and close the door.
Turn the programme selector to Fluff Clean.
Press the Start/Pause button.
The Fluff Clean programme can also be run at any time without
prompting by the appliance.
Rinse + Spin:
An additional rinse cycle with a final spin. If the laundry is to be removed
dripping wet, set the Spin speed to $ (Rinse hold) before Programme
start –> page13.
Drain + Spin:
Drain the rinsing water following a programme with
$ (Rinse hold) –> page13.
Turn the programme selector to Drain + Spin.
Set the spin speed to $ (Rinse hold).
Press the Start/Pause button.
or
Drain and spin at the desired spin speed:
Turn the programme selector to Drain + Spin.
Press the Spin button repeatedly until the desired spin speed is set.
Press the Start/Pause button.
i
Loading ...
Loading ...
Loading ...