Loading ...
Loading ...
Loading ...
Installation
65
EN
Accessing the terminal board
To connect the power cable, you need to
access the terminal board on the rear
casing:
1. Remove the screws that fasten the
access plate to the rear casing.
2. Rotate the plate slightly and remove it
from its seat.
3. Install the power cable.
4. When finished, replace the plate on the
rear casing and fasten it in place using
the screws that were previously
removed.
It is recommended to loosen the
screws of the cable grip before
installing the power cable.
Loading ...
Loading ...
Loading ...