Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
61
Additional installation
requirements
Risk of injury from an electrical
shock when the appliance lid is
removed.
There is a risk of electric shock
because electrically charged
components in the dryer are
accessible with the lid removed.
For safety reasons, the tumble dryer
must be disconnected from the
electricity supply.
Suitable for pushing under a worktop
Appliance defect due to a build-up of
heat.
Make sure there is adequate room
for warm air from the dryer to be
directed away.
This tumble dryer is suitable for pushing
under a worktop if there is space to do
this without removing the lid.
- The appliance lid must not be
removed.
- The electrical socket must be located
in an accessible position near the
appliance.
- Drying durations may increase
slightly.
Optional accessories
– Building-under kit
A building-under kit is required if the
tumble dryer lid needs to be
removed in order to build it under a
worktop.
It must be installed/dismantled by a
suitably qualified fitter.
The cover plate included in the
building-under kit replaces the
appliance's lid. The cover plate has to
be fitted for electrical safety!
Fitting instructions are supplied with the
building-under kit.
– Washer-dryer stack
The tumble dryer can also be combined
with a Miele washing machine in a
washer-dryer stack. The appropriate
Miele washer-dryer stacking kit is
required.
– Plinth
The tumble dryer can be fitted with a
plinth with drawer (please note the
plinth may not be available in all
countries).
Loading ...
Loading ...
Loading ...