Loading ...
Loading ...
Loading ...
OPERATION
ClockandTimer(UpperOven)
Theclock must be set for the correct
time of day before a delayed oven
function can work properly. The time of
day cannot be changed during a timed
even function, but can be changed
during a bake or broil function.
HOW TO SET THE CLOCK
® ®
1. Pressthe CLOCK pad.
2. Pressthe HOUR/MINUP and/or
DOWN arrow pads to setthe time.
3. Pressthe START pad.
RECALL THE CLOCK
While using your ovenfor cooking,
press the CLOCK pad ifyou wish to
check the time of day. The current time
of day will show in the disptay.
POWER FAILURE
Ifyou have experienced a power
failure, the time will flash in the display
and will be incorrect. Resetyour clock.
Any oven cooking function thatwas in
process will need to be reset.
The Kitchen Timer is used to time
cooking processes or other household
activities. It does not control the oven.
It can be set for up to 9 hours and 59
minutes. It will count down in minutes
until the LAST 60 SECONDS is
reached, then the control wilt beep
once. When the countdown reaches
ZERO, the control will beep 3 times
followed by one beep every 6
seconds until the KITCHENTIMER pad
is pressed. The 6-second beep can be
removed for future cycles if desired. For
directions on removing this continuous
beep, see Tones on the following page.
HOW TO SET THE TIMER
1. PresstheKITCHEN TIMER pad.
2. Pressthe HOUR/MIN UP and/or
DOWN arrow pads to settime.
3. Pressthe START pad.
4. When the countdown has reached
zero, press the KITCHEN TIMER
pad to turn off the beep.
Tocancel the timer during the
countdown, pressthe KITCHENTIMER
padTWICE.
Your control will allow you to lock the
touch pads so they cannot be activated
when pressed. Ifyou're worried about
leavingthe oven unsupervised, activate
this feature.
1. Press and hold, at the same time,
the HOUR/MIN DOWN arrow pads
for 3 seconds, until the display
shows "LOC ON."
2. To unlock the control, press
and hold, at the sametime, the
HOUR/MIN DOWN arrow pads
for 3seconds, untilthe display
shows "LOC OFF."
This feature can only be set when the
oven is not in use.
When this feature is on, no touch
pads will work. Thedisplay will show
"LOC ON" if a touch pad is pressed.
The adjustment will be retained in
memory after a power failure.
8
20P306-2 ENv 2/14_3, 3:56 PM
Loading ...
Loading ...
Loading ...