Loading ...
Loading ...
Loading ...
26
BEFORE YOU CALL
Visit our web site at
www.frigidaire.com
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
CONCERN CAUSE SOLUTION
AUTOMATIC ICE MAKER
Ice maker is not
making any ice.
• Ice maker is turned off.
• Refrigerator is not con-
nected to water line or
water valve is not open.
• The water supply line
is kinked.
• The water lter is not
seated properly.
• The water lter may
be clogged with
foreign material.
• Turn on ice maker. Press and hold the “ON-
OFF” button for three seconds until the
indicator light is on.
• Connect the unit to the household water
supply and ensure the water valve is open.
• Ensure that the supply line does not kink
when the refrigerator is pushed into place
against the wall.
• Remove and re-install the water lter. Remove
by rotating it counterclockwise (to the left) 90
degrees to release it. Re-install by sliding it into
the lter housing as far as it will go with the grip
end horizontal. Push lightly inward on the lter
while rotating it clockwise (to the right). The
lter will then pull itself inward as it is rotated.
Rotate the lter 90 degrees until it stops and the
grip end is vertical. You may be able to feel a
very light click as the lter locks into place.
• If water dispenses slowly or not at all, or if
the lter is 6 months old or older, it should
be replaced.
Ice maker is
not making
enough ice.
• Ice maker is producing
less ice than you expect.
• The water lter may
be clogged with
foreign material.
• The water supply line
is kinked.
• Saddle valve on
cold water pipe is
clogged or restricted
by foreign material.
• Heavy trafc, opening or
closing of the
doors excessively.
• Freezer control is set
too warm.
• The ice maker produces approximately 2.5
to 3 pounds every 24 hours depending on
usage conditions.
• If water dispenses slower than normal,
or if the lter is six months old or older, it
should be replaced.
• Ensure that the supply line does not kink
when the refrigerator is pushed into place
against the wall.
• Turn off household water line valve. Re-
move valve. Ensure that valve is not a self-
piercing saddle valve. Clean valve. Replace
valve if necessary.
• Press Quick Freeze to temporarily increase
ice production rate. (Does not apply to
Frigidaire Professional.)
• Set freezer control to colder setting to im-
prove performance of the ice maker. Allow
24 hours for temperature to stabilize.
Loading ...
Loading ...
Loading ...