Loading ...
Loading ...
Loading ...
KNOWYOURTRIMMER
READTHISOPERATOR'SMANUALANDSAFETYRULESBEFOREOPERATINGYOUR
UNIT.Comparetheillustrationswithyourunittofamiliarizeyourselfwiththeloca-
tion of the various controls and adjustments. Save this manual for future refer-
ence.
Assist Handle
Tube
Muffler
Trimmer
\\ Throttle Head
ON/STOP Trigger ...........
Switch \ Spark Plug ......
Starter
ON/STOP SWITCH
The STOP switch is used to stop engine.
Press and hold switch to stop engine.
PRIMER BULB
The PRIMER BULB removes air from
the carburetor and fuel lines and fills
them with fuel. This allows you to start
the engine with fewer pulls on the
starter rope. Activate the primer bulb
by pressing it and allowing it to return
to its original form.
Shield
Choke Lever \
Primer Bulb
Fuel Mix
Fill Cap
Line
Limiter
Blade
CHOKE
The CHOKE helps to supply fuel to the
engine to aid in cold starting. Activate
the choke by moving the choke lever to
the FULL CHOKE position. After the en-
gine attempts to start, move the choke
lever to the HALF CHOKE position. Once
engine has started, move the choke le-
ver to the OFF CHOKE position.
BEFORE STARTING ENGINE
_i, WARNING: Be sureto read
the fuel information in the safety rules
before you begin. If you do not
understand the safety rules, do not
attempt to fuel your unit. Call
1-800-235-5878.
FUELING ENGINE
This engine is certified to operate on
unleaded gasoline. Before operation,
gasoline must be mixed with a good
quality 2-cycle air-cooled engine oil.
We recommend Craftsman brand oil.
Mix gasoline and oil at a ratio of 40:1
(A 40:1 ratio is obtained by mixing 3.2
ounces of oil with 1 gallon of unleaded
gasoline). DO NOT USE automotive oil
or boat oil. These oils will cause
engine damage. When mixing fuel,
follow instructions printed on container.
Once oil is added to gasoline, shake
container momentarily to assure that
the fuel is thoroughly mixed. Always
read and follow the safety rules
relating to fuel before fueling your unit.
IMPORTANT
Experience indicates that alcohol
blended fuels (called gasohol or using
ethanol or methanol) can attract mois-
ture which leads to separation and
formation of acids during storage.
Acidic gas can damage the fuel sys-
tem of an engine while in storage.
To avoid engine problems, empty the
fuel system before storage for 30 days
or longer. Drain the gas tank, start the
5
Loading ...
Loading ...
Loading ...