Loading ...
Loading ...
3
Description
1. Assembly
1
3
2, 6
9
11
4
8
12
5
7
10
1-3
Operate cleaning system only at
voltage specified on power unit.
This system is intended for resi-
dential use.
This system is designed for dry
pick-up only.
Grounding
Instructions
This appliance must be grounded. If it
should malfunction or breakdown,
grounding provides a path of least
resistance for electrical current to
reduce the risk of electric shock. This
appliance is equipped with a cord hav-
ing an equipment-grounding conductor
(A) and grounding plug (B). The plug
must be plugged into an appropriate
outlet (C) that is properly installed and
grounded in accordance with all local
codes and ordinances.
DANGER-
Improper connection of the equipment-
grounding conductor can result in the
risk of electric shock. Check with a
qualified electrician or service person if
you are in doubt as to whether the outlet
is properly grounded. Do not modify
the plug provided with the appliance -
if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This appliance is for use on a nominal
120 volt circuit and has a grounding
plug that looks like the plug illustrated in
Fig. 1-1.
A Temporary adapter (D) may be used
to connect this plug to a 2-pole recepta-
cle (E) if a properly grounded outlet is
not available. The Temporary adapter
should be used only until a properly
grounded outlet (C) can be installed by
a qualified electrician. The green col-
ored rigid ear (F), lug, or the like extend-
ing from the adapter must be connected
to a permanent ground such as a prop-
erly grounded outlet box cover.
Whenever the adapter is used, it must
be held in place by a metal screw (G).
1-1
1-2
NOTE: In Canada, the use of a tempo-
rary adapter is Not Permitted by the
Canadian Electrical Code.
B
C
D
E
A
F
G
CANAVAC SYSTEMS INC
ONTARIO, CANADA
LR37447
NRTL/C
MODEL
120 V
60 HZ
WARNING:
AVERTISSEMENT:
Serial No.
No. Desérie
Mount at least 12 in. from ceiling.
Connect to individual brance circuit.
To reduce the risk of electric shock do not
use outdoors or on wet surfaces.
Assurer un dégagement d'au moids 12 po. entre les plafond
selon les cas.
Brancher a une derivation distincte
Pour reduire les risgues de choc
matieres humides.
electrique ne pas utiliser a l'exterieur et ne pas aspiere de
E119989
C
U
L
1. Motor module
2. Motor exhaust (back of unit)
3. Hose inlet
4. Dirt container (contains
Mounting bracket - Fig. 2-1
and tools - Fig. 3-2)
5. ON-OFF switch
6. Power cord (back of unit)
7. Data label
8. Mounting bracket
(packed inside dirt container)
9. Hose rack
10. Tools
11. Tool caddy
12. Hose
Loading ...
Loading ...
Loading ...