Loading ...
Loading ...
Loading ...
INSTANT SAVINGS
The energy monitoring socket uses real
time data to help you become more aware of
how much electricity an appliance is using.
With this knowledge you can make more
informed choices about what, when and
how to use the appliance according to your
energy saving objectives
HOW IT WORKS
The energy monitoring socket is a simple
plug-in device that sits between the
appliance and the wall socket. When you
plug in an appliance, the efergy energy
monitoring socket displays the consumption
of that appliance in watts and the cost per
year. You can also view the cost
accumulated so far and the cost per day by
pressing the cost button.
DIFFERENT MODES
The energy monitoring socket is flexible in
the way you can view data. Press the cost
button to switch between cost settings, the
energy button to switch between energy
settings, and you can change the time
setting by pressing the up button (see the
set-up instructions left).
CUMULATIVE DATA
The energy monitoring socket adds up
your energy data cumulatively so that you
can see how much energy you’ve used
since the appliance was switched on. Also
you can check how long the appliance has
been running for by pressing the up and
down buttons.
Press and hold the cost button to enter set-up
You will then see the currency symbol flashing
Use up & down buttons to choose your currency. Press cost
Use up & down buttons to choose TARIFF 1. Press cost
Use up and down buttons to set the tariff cost
Press the cost button to move on to the next digit
Repeat the process until you have entered each digit
Press cost once more to exit
SINGLE TARIFF SET-UP
•
•
•
•
•
•
•
•
TIME
Seconds
Minutes
Hours
Days
COST
So Far
Per Day
Per Year
ENERGY
Watt (W)
Kilowatt Hours (kWh)
Voltage (V)
Current (A)
Frequency (Hz)
Power Factor (%)
Max. Watts (W)
Enter set-up as descibed above, but select DUAL TARIFF
Use the up and down buttons to set tariff 1 start time
Press the cost button to move on to the next digit
Repeat the process to set tariff 2 start time. Press cost
Again, use the same process to set tariff 1 & tariff 2 cost
Press cost to exit after setting cost details for both tariffs
Plug in the EMS product to start saving money and energy now
DUAL TARIFF SET-UP
•
•
•
•
•
•
•
TIME SET-UP
Press and hold up to enter set-up. Press energy to begin
Use up and down to set each digit. Press energy to confirm
Press cost to exit
•
•
•