Loading ...
Loading ...
Loading ...
Manual Operation
Setting the clock
Example: setting clock display for 9:00:
1. Touch
2. Enter time using number pads.
3. Touch p ad .
p a d once .
Setting the timer
Example: setting timer for 5 minutes:
1. Touch pad once.
2. Enter desired time using number pads.
3. Touch
TIMER
pad.
When the timer has reached the end of set time, you will
hear beep alerts indicating the timer has run out.
Timer count down does not stop even if the door is opened.
To stop/cancel the timer, press the
key once .
Control Lock
You may lock the control panel to prevent the microwave
from being accidentally started or used by children.
The control lock feature is very useful when cleaning the
control panel. The lock will prevent accidental programming
when wiping the control panel clean.
Example: to set the control lock ON:
Touch and hold the pad for more
than 3 seconds. The Lock icon will appear in
the display window along with 1 beep.
Example: to change the control lock from ON to OFF:
Touch and hold the pad for
more than 3 seconds. The Lock icon will
disappear in the display window.
START
Setting the clock ON/OFF
1. Touch
2.
Time will display, after 3s, OFF
will display.
OFF
Clock display ON default.
and hold pad .
Press pad twice.
This feature will let you quickly start or add 10 or
Touch the
pad to :
time this pad is touched during
microwave
cooking.
Start cooking
each
Using the key
Example: to add 1 minute of cook time during 100%
microwave cooking :
1. Start programmed cooking.
2.
3.
+10 sec /+ 30 sec
+10 SEC/+30 SEC
for 10 seconds/30 seconds at 100% power
level.
Extend cooking time in multiples of 10 seconds/30 seconds
30 seconds.
NOTE
You must
open then
door again to clear ''Food'' from the
display.
close the
"Food" will be displayed if a quick start cooking cycle or
+10 Sec / +30 Sec key is pressed more than 5 minutes
after the door of microwave oven is closed.
EN-9
CANCEL
CANCEL
NOTE
Press
the
button
to enter the clock query state
and return to the standby mode after 1 second. The
clock is not displayed.
Hold
down
the
key
for
1-3
seconds
to
display
the
current clock. After 1 second, display the current clock
and enter the clock setting mode.
When the clock display off:
TIMER
TIMER
+30 SEC
+10 SEC/+30 SEC
+30SEC
• Plug in the oven. Close the door. The oven display
will flash 12:00.
• If no operation after 1 minute, the oven will show
12:01.
1.Before operating your new oven make sure you read
and understand this Use and Care Guide completely.
2.Before the Built-in Convention Microwave Oven
3. Set clock. See below.
can be used, follow these procedures:
Loading ...
Loading ...
Loading ...