Loading ...
Loading ...
Loading ...
26 49-1000472 Rev. 5
INSTALLATION INSTRUCTIONS
Installation Instructions
INSTALLING THE REFRIGERATOR
2B
FREEZER HANDLE WITH
SET-SCREWS
Ŷ IMPORTANT:'RQRWXVHSRZHUWRROVWR
tighten set screws.
Tools Provided:
Ŷ´KH[NH\
+DQGOHDSSHDUDQFHPD\YDU\EDVHGRQPRGHO
however, the installation process is the same.
Remove any protective film from the door
or drawer fronts before installing handles (if
applicable).
Remove handle from packaging and locate
WKHSURYLGHG´KH[NH\
Place the handle over the mounting fasteners
until it is flush against the surface of the door.
Tighten both set screws in the handle end
FDSVE\WXUQLQJWKH´KH[NH\FORFNZLVH
until the handle will not hang loose or fall
IURPLWVPRXQWLQJ'RQRWIXOO\WLJKWHQ\HW
IMPORTANT: Hold the handle firmly against
the door, make sure there are no gaps
between the handle end caps and the door,
and fully tighten the set screws.
To remove, reverse the installation process.
A
B
C
'
E
)
SLIDE-ON TYPE FREEZER
HANDLE
,QVWDOOWKHIUHH]HUKDQGOHWRWKHPRXQWLQJIDVWHQHUVE\
aligning the slots inside the handle endcap with the
mounting fasteners. Being careful to avoid scratching
the door finish, slide the handle to the right until it comes
to a hard stop.
8VHDUXEEHUPDOOHWLIXQDYDLODEOHDKDPPHUZLWKD
towel wrapped around head of hammer can be used as
well), to gently tap the left side of handle until the handle
no longer moves left or right. A few taps should be
used rather than using heavy force witch can cause
handle/endcaps to get damaged.
2A
)DVWHQHUV
Slot
Endcap
)UHH]HU+DQGOH
Loading ...
Loading ...
Loading ...