Loading ...
Loading ...
Loading ...
Fanaway Mya Installation Instructions
9 | P a g e M YA- M E N A R D S V e r s i o n 1 . 0 1 / 2 0 2 1
8. Install the globes to the lamp holders. Do not exceed the maximum power rating (Fig. 11).
9. Finally install the lamp Shade to the laight kit plate by turning it clockwise.
INSTALLING THE TRANSMITTER HOLDER Fig. 12
Install the holder to the wall with two screws provided, hang up the transmitter by the holder.
USING YOUR CEILING FAN
SETTING DIP SWITCHES
When two or more fans are located near each other, you may desire to have the receiver/transmitter for
each fan set to a different code, so that the operation of one fan does not affect the operation of the other
fans.
The DIP switches for the receiver are located on the flat surface of the receiver. The DIP switches for the
transmitter are in the battery compartment. Fig. 13.
NOTE: Ensure that the power to the supply wires has been turned off before setting the code.
Fig. 11
Lamp shade
Fig. 12
Loading ...
Loading ...
Loading ...