Sencor SFT 3113BK User Manual

Loading ...

04/2021

Tower Fan

User'smanual

■ Prior to using this appliance, please read the user‘smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user‘smanual.

Keep this user‘smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

DESCRIPTION OF THE FAN

A1 Rotating speed control

A2 Air outlets

A3 Base

A4 Air inlets

DESCRIPTION OF THE CONTROL PANEL

B1 Button - serves to set the fan

speed

B2 Button

- serves to set the timer

B3 Button

- serves to turn the

appliance on / off

B4 Button

- serves to turn

horizontal oscillation on / off

B5 Button

- serves to select the

operating mode

DESCRIPTION OF THE REMOTE CONTROL

C1 Button - serves to turn

horizontal oscillation on / off

C2 Button

- serves to set the timer

C3 Button

- serves to turn the

appliance on / off

C4 Button

- serves to select the

operating mode

C5 Button

- serves to set the fan

speed

INSTALLING THE BASE

The fan is supplied from the factory with adisassembled base.

1. Take the body of the fan out of the packaging material and carefully turn it

upside down – see figure D1.

2. Place both parts of the base A3 against the bottom part of the body of the fan.

Check that the power cord passes through the hole in the middle of the base

A3 – see figure D2.

3. Carefully push both parts of the base A3 until they click into the body of the fan

– see figure D3.

4. Using the supplied bolts, secure the base A3 in place – see figure D4.

USING THE FAN

Place the fan on ahorizontal, stable, dry and smooth surface within reach of apower

socket. Connect the power cord to apower socket.

Turning on / off

Press button B3, to turn on the fan. The power indicator light will be lit. Press button

B3 again to turn off the fan.

Speed setting

To set the speed of the fan, use button B1. Repeatedly press button B1 to toggle

through the speeds in the following order: L(low speed) – M(medium speed) – H(high

speed). Each time the button is pressed, the indicator of the respective speed will also

be lit on the control panel.

Setting the timer

To set the timer, use button B2. The timer can be set in the range of 30 minutes

to 7 hours and 30 minutes. Each time button

B2 is pressed, the timer duration

is increased as follows: 30minutes – 1hour – 2hours – 4hours. Indicator lights will

gradually be lit on the control panel A1, indicating the total duration of the timer.

After the set time has elapsed, the fan will turn off automatically.

Setting horizontal oscillation

Pressing button B4 will start the left to right oscillation of the fan. Pressing button

B4 again will turn off the oscillation. The fan will remain turned at the angle at

which it was stopped.

Selecting an operating mode

To select an operating mode, use button B5. Repeatedly press button B5 to

select the required operating mode: NORMAL (standard mode) – NATURE (natural air

flow mode) – SLEEP (sleep mode). If the operating mode NATURE or SLEEP is selected,

the respective indicator will also be lit on the control panel A1.

The default mode is NORMAL (normal mode).

Controlling the fan using the remote control

Controlling the fan using the remote control is the same as using the control panel A1.

The symbols on the remote control correspond to the symbols on the control panel

A1.

CLEANING AND MAINTENANCE

Before cleaning it, make sure that the fan is turned off and disconnected from the

power socket. Clean the fan regularly to ensure its long lifetime.

For cleaning, do not use cleaning products with an abrasive effect, solvents, etc. that

could damage the appliance.

Warning:

To prevent the risk of injury by electrical shock, do not submerge

the appliance, power cord or power plug in water or any another

liquid.

To clean the outer surface of the of the fan, use aclean, lightly dampened cloth. Then

wipe everything so that it is thoroughly dry. Ensure that moisture does not enter

through the air inlets or outlets into the fan.

You can also remove any dirt inside the air inlet or outlet by using avacuum cleaner

with abristle brush.

Note:

Regularly check that the bolts on the base A3 are securely tightened.

STORAGE

If you will not be using the fan for alonger period of time, store it in aclean, dry

location that is out of reach of children.

TECHNICAL SPECIFICATIONS

Rated voltage range .........................................................................................................220–240V~

Rated frequency..............................................................................................................................50Hz

Rated power input .......................................................................................................................... 50W

Noise level ....................................................................................................................................56 dB(A)

Maximum air flow of the fan ......................................................................................... 7.38m

/min

Operation value ...........................................................................................................0.2 (m

/min)/W

Maximum air flow speed ....................................................................................................... 0.68m/s

Standard for measuring the operating value ............................................... EN ISO 5801:2008

Contact for further information ..FAST ČR, a.s., USanitasu 1621, 251 01 Říčany, Czechia

The declared noise emission level for fan model SFT 3113BK is 56 dB(A), which

represents alevel Aof acoustic power with respect to areference acoustic power of

1pW.

We reserve the right to change the text and technical specifications.

Safety class for electrical shock protection:

Class II – Electrical shock protection is provided by double or heavy-duty

insulation.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF

USED PACKAGING MATERIALS

Dispose of used packaging material at asite designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used

electric or electronic products must not be added to ordinary

municipal waste. For proper disposal, renewal and recycling hand over

these appliances to determined collection points. Alternatively, in

some European Union states or other European countries you may

return your appliances to the local retailer when buying an equivalent

new appliance. Correct disposal of this product helps save valuable natural resources

and prevents potential negative effects on the environment and human health, which

could result from improper waste disposal. Ask your local authorities or collection

facility for more details. In accordance with national regulations penalties may be

imposed for the incorrect disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier

for the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product,

request the necessary information about the correct disposal method from the local

council or from your retailer.

This product meets all the basic requirements of EU directives related to

it.

Sencor SFT 3113BK Tower Fan

User Manual - Page 4