Loading ...
Loading ...
Loading ...
(413,1)
北米Model "A3240BE-A" EDITED: 2022/ 7/ 29
2. Sit in the driver’s seat and face forward
for a few moments.
3. When user recognition is completed,
the Hello screen appears on the center
information display.
At this time, the seat position, outside
mirror angle, climate control settings,
combination meter display (color LCD)
basic screen and center information dis-
play basic screen will all change based on
the user information.
NOTE
. When a center information display
operation switch is pressed, the
user recognition screen is canceled,
however user recognition con-
tinues.
. When the select lever is not in the
“P” position, the seat position will
not change even when user recogni-
tion is completed.
. If user recognition fails, perform
recognition again following the in-
structions, refer to “When a user is
not recognized” �P411.
. User recognition is not performed
while driving.
. If the seat position or outside mirror
angle are in motion at the time when
user recognition is completed, then
it is not possible to retrieve the seat
position, outside mirror angle, or
reverse tilt-down outside mirror an-
gle.
. If any of the following operations is
performed while retrieving of the
seat position or outside mirror an-
gle, retrieving of the seat position
and outside mirror angle is can-
celed.
– The power seat adjustment
switch was operated.
– The outside mirror adjustment
switch was operated.
– The “SET” button was pressed.
– The “1” or “2” button was
pressed.
– The select lever was moved to a
position other than “P” position.
! When a user is not recognized
S07BP0402
In the following case, user recognition may
not be possible and “User recognition
stopped” may be displayed.
. There is an object blocking the camera.
Remove the obstacle and follow the
reference procedure to perform user re-
cognition again. Refer to “Driver Monitor-
ing System” �P222.
1 Camera
NOTE
. User recognition may not be possi-
ble when there is dirt or fingerprints
on the user recognition camera. To
clean, either wipe using a soft cloth
or else wipe gently using a mois-
tened cloth that has been thoroughly
– CONTINUED –
Driver Monitoring System
411
7
Starting and operating
Loading ...
Loading ...
Loading ...