Conair GS37AMZR Handheld Garment Steamer

Instruction Booklet - Page 3

For GS37AMZR. Also, The document are for others Conair models: GS38

PDF File Manual, 16 pages, Read Online | Download pdf file

GS37AMZR photo
Loading ...
Loading ...
13. Do not place the steam nozzle directly on
any surface or on the appliance power cord
while it is hot or plugged in.
14. Unplug this appliance before filling or
emptying the water.
15. Do not operate steamer without properly
filling the water container with distilled water.
16. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
17. Burns could occur from touching hot
parts, hot water, or steam. Use care when
removing water reservoir or when you turn
a steam appliance upside down – there may
be hot water in reservoir. Always position
steamer with head away from you and any
other person when turning on.
18. Do not hold hand in front of steam.
19. To reduce likelihood of circuit overload,
do not operate another high-wattage
appliance on the same circuit.
20. Use caution when installing or removing
an attachment as it may contain hot water
from condensation. Ensure that the unit is
off, attachment is dry or cooled off to avoid
contact with hot water.
21. Never steam clothes you, or someone
else, are wearing.
22. When emitting steam, this appliance may
cause burns if it is used too close to the skin
or eyes, or if it is used incorrectly. To reduce
the risk of contact with hot water emitting
from the steam vents, test appliance before
use by holding it away from the body.
SAVE THESE
INSTRUCTIONS
IMPORTANT
FOR HOUSEHOLD USE ONLY
FILLING INSTRUCTIONS
1. Make sure the unit is unplugged.
2. Stand the unit on a table and grasp
with one hand.
3. With other hand,
move the release
switch up toward the
steam head nozzle.
4. Pull the reservoir
out, away from the
steamer body.
5. The rubber inlet
cover is located
on the top of the
water reservoir.
6. Open the inlet cover and fill the reservoir
with distilled water (which can be found in
grocery stores). We recommend that you
use distilled water only as this will prevent
mineral deposits in the boiler that can reduce
performance or clog the water system.
7. Close the inlet cover and return the
reservoir to its place, making sure that it
snaps in place and is secure.
Loading ...
Loading ...
Loading ...